I have an 03 TD lux and have noticed a clunking noise when I change gears from the rear end. Its not very loud but you can tell its there.
My main question is are these diffs prone to getting worn out around the 100K mark? This noise may be a uni possibly or tailshaft but its so darn hard pin pointing this while driving! Any ideas would be great.
Cheers Cody.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
03 hilux diff
Moderators: toaddog, Elmo, DUDELUX
All the bearings in your diff center are under a small amount of load. It makes them take the load of driving over the entire face. If this preload has change it can effect your backlash which is how far and where the teeth of your diff mesh into each other.
My hilux pinion bearing started to go at about 110,000km and when i got it rebuilt i was told it was worn beond beable to get the backlash set up perfectly right.
My hilux pinion bearing started to go at about 110,000km and when i got it rebuilt i was told it was worn beond beable to get the backlash set up perfectly right.
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Who is online
Users browsing this forum: No registered users and 129 guests