Im hoping to fit some genuine GUIV flares to my 06 DX Nissan Patrol
I can get some through a wrecker for a realistic price but I have a few dilemas.
1. ST panels are pre drilled for the mounting holes / plugs where as the DX is a plain panel, no markings or holes.
2. I cannot seem to get a template to fit these flares for correct hole / drilling position
Has anyone attempted this with sucess before? Are there templates available?
If anyone has any ideas / suggestions It would be greatly appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GUIV genuine Flares
GUIV genuine Flares
GU 2006 DX Nissan Patrol 4.2L TD Intercooled Wagon
Flares
Hi Mate, I thought that may be the case also however,
I emailed Nissan Motor Company and this is the response I recieved:
"We do advise that enquiries have been made through to our National Service & Engineering Departments, who have advised that the holes to which you refer to are pre stamped as part of the panel manufacturing.
This being the case unfortunately we don’t have a template for the mounting of the flares in question.
May we respectfully suggest, that contact be made with a panel shop, who may be in a better position to offer further advise regarding fitting".
So I may need to trace it from a wrecked vehicle or something I guess???
I emailed Nissan Motor Company and this is the response I recieved:
"We do advise that enquiries have been made through to our National Service & Engineering Departments, who have advised that the holes to which you refer to are pre stamped as part of the panel manufacturing.
This being the case unfortunately we don’t have a template for the mounting of the flares in question.
May we respectfully suggest, that contact be made with a panel shop, who may be in a better position to offer further advise regarding fitting".
So I may need to trace it from a wrecked vehicle or something I guess???
GU 2006 DX Nissan Patrol 4.2L TD Intercooled Wagon
Who is online
Users browsing this forum: No registered users and 7 guests