Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Drop shackles the solution???
Moderators: toaddog, Elmo, DUDELUX
Drop shackles the solution???
I have leaf over front and back, but the front leafs are pretty much flat and the front sits 2 inches lower then the rear. Will 2 inch drop shackles fix this problem?? If not, what will?
And with the extra 2 inchs will anything have to be adjusted, front shaft??
Pic links below
Thanks a heap.
http://www.fmxaustralia.com/forum/attac ... ntid=90642
http://www.fmxaustralia.com/forum/attac ... ntid=90643
And with the extra 2 inchs will anything have to be adjusted, front shaft??
Pic links below
Thanks a heap.
http://www.fmxaustralia.com/forum/attac ... ntid=90642
http://www.fmxaustralia.com/forum/attac ... ntid=90643
So either of these then??
http://cgi.ebay.com.au/TOYOTA-HILUX-GRE ... dZViewItem
http://cgi.ebay.com.au/TOYOTA-HILUX-EXT ... dZViewItem
I only want about 2inches so the car sits level and not lower in the front.
Should the leafs be flat like they are in the pics?? Anyway to get the U shaped bend back in them?
http://cgi.ebay.com.au/TOYOTA-HILUX-GRE ... dZViewItem
http://cgi.ebay.com.au/TOYOTA-HILUX-EXT ... dZViewItem
I only want about 2inches so the car sits level and not lower in the front.
Should the leafs be flat like they are in the pics?? Anyway to get the U shaped bend back in them?
With the front it may need castor wedges fitting and if shockies are to short the shock will be at max drop and give a crap ride. The first ones are available through ripco and so on and i'm sure you'll get them cheaper than them ones.macca81 wrote:2nd ones will provide some lift.
Yeah or they sag to the right, Parabolics are good for keeping there lift.macca81 wrote:im no expert on lux leaves, but i dont think iv ever seen a standard lux that doesnt have flat front leaves
plenty of parts on the bench
Mate..Those springs are stuffed, sagged and shagged... get yourself some newies.
Dont fart around with extended shackles til you get your springs right...
My opinion based on years spent building and re-building fj40's...
Regards Gaz...
Dont fart around with extended shackles til you get your springs right...
My opinion based on years spent building and re-building fj40's...
Regards Gaz...
Old 40's last forever as long as you keep fixing the buggers...
'If ya didn't build it ya dont own it'
3rd Rock 4x4 member
'If ya didn't build it ya dont own it'
3rd Rock 4x4 member
Anyone know where in Bris I can get a decent set of leafs from??
Something like these:
http://cgi.ebay.com.au/TOYOTA-HILUX-FRO ... dZViewItem
Something like these:
http://cgi.ebay.com.au/TOYOTA-HILUX-FRO ... dZViewItem
depend on what you want.
pretty much all aftermarket springs will add 2 inch lift - not many make standard height ones.
can anyone advise if standard lux shocks will take a 2 inch lift?
you also need to take into account the need for new bushes which would be replaced at the same time.
You maight also need to consider replacing your old shackels if the old ones are rusty on the thread.
I priced cheap ones in the past and just under $300 will get you springs shackles and bushes.
I have seen several sets of bush kits on ebay which seem quite cheap, but i have found cheaper springs else where.
If you do a search you will find other info in the forum from people rating differant springs as some people have found the cheaper ones sag so fast that in 12 months your bkac where you started. same as all japanese standard springs fom 80s and 90s sagged like buggery, nissan toyota im looking at you!
pretty much all aftermarket springs will add 2 inch lift - not many make standard height ones.
can anyone advise if standard lux shocks will take a 2 inch lift?
you also need to take into account the need for new bushes which would be replaced at the same time.
You maight also need to consider replacing your old shackels if the old ones are rusty on the thread.
I priced cheap ones in the past and just under $300 will get you springs shackles and bushes.
I have seen several sets of bush kits on ebay which seem quite cheap, but i have found cheaper springs else where.
If you do a search you will find other info in the forum from people rating differant springs as some people have found the cheaper ones sag so fast that in 12 months your bkac where you started. same as all japanese standard springs fom 80s and 90s sagged like buggery, nissan toyota im looking at you!
Thanks fellers. I bought the ones in the link I showed ya anyway, see how they go.
Was thinking about putting a pair of extended shackles in the front too, some bloke the other day was telling me that they handle like sh!t with them in the front though, well it handle terrible anyway
Anyone have a link for a bush kit??
Was thinking about putting a pair of extended shackles in the front too, some bloke the other day was telling me that they handle like sh!t with them in the front though, well it handle terrible anyway
Anyone have a link for a bush kit??
Would these shackles do the job with the new springs?? It seems they dont need bushes
http://cgi.ebay.com.au/TOYOTA-HILUX-GRE ... m153.l1262
http://cgi.ebay.com.au/TOYOTA-HILUX-GRE ... m153.l1262
Who is online
Users browsing this forum: No registered users and 0 guests