Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What is the numerically lowest Sierra diff ratio?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

What is the numerically lowest Sierra diff ratio?

Post by N*A*M »

Did Suzuki ever make any R&P ratio around 3:1 or numerically less that can fit into wide track Sierra diffs?
Top
Posts: 115
Joined: Tue Oct 21, 2003 5:27 pm
Location: Sydney

Post by No Idea »

i don't know if they would fit, or what the ratio of them is, but I looked under a suzuki carry at the wreckers on the weekend, and the diff centre looks surprisingly like a sierra one.
Does anyone know if this is possible, and what ratios they are?
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Ok nam ,
Are you having a brain fart ? :finger:



After the land speed record ? :finger:

What are you trying to achieve ? :idea:
You can pm me if secret squirrel stuff ;)

1 - 3.7

Im not entirly sure on this one BUT ,
I have heard that carrys have lower ratios than LJs , And Some comp ljs
not including ones that are green , run carry centre Parts Not the complete centre , but parts so i assume they would be the same physical
size as a 1ltr centre not a 1.3. only a hypothesis. but they use them to gain LOwer ratios maybe round the 6 mark. :?:
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Apperently in europe there are diesal powered Zuks with a 3.4 ratio instead of the general 3.73 ratio, the lowest (highest :?: :!: ) is a 5.83 I think that calmini sell ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

no spazbot raise an interesting idea of fitting the volvo portal hubs to sierra diff housings. i'm just having a think about it is all...
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

N*A*M wrote:no spazbot raise an interesting idea of fitting the volvo portal hubs to sierra diff housings. i'm just having a think about it is all...


don't you dare. I cannot concieve a worse dereliction than sliced and diced military axles lying in the gutter. :cool:
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

N*A*M wrote:no spazbot raise an interesting idea of fitting the volvo portal hubs to sierra diff housings. i'm just having a think about it is all...


By the time you brace the housings enough to stand up ot the extra leverage the protals woud put on them they would be as heav as the axles they can off .. minus the factory lockers ...

My housings are litterally cracking up with just 35's .. Iamgine the extra leverage of portals and say 35's or 37's .... I rekon you would have custom pretzls in no time ... save you $$$ If you must add them to another housing .. why not something strong in the first place .. ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Bing [Bot] and 0 guests