ok heres the go.... i have a white mq with a half decent body, but a smokey engine and buggered front diff....
i also have a red mq with good engine and drive line, but the body is cactus it s been rolled over.... how hard to swap the body over? just unbolt body and lift whilst taking care to undo any wires etc while you go or more to it than that?
also wats the easiest way to tell if the front diff housing is bent?
i was gonna just change engines, but this latest developemnet with the front diff in whitey has me thinkin it may be easier to do this as the red one is on gas also and has all the aircon stuff....
anyone changed or pulled a body off before?
i have fitted bodylifts before is it just like doin that but a bit more?
also would a 1 tonne block and tackle lift it?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mq body swap??
mq body swap??
ours is not to ask why, but to do or die!
Who is online
Users browsing this forum: No registered users and 91 guests