suspension problems

Post by **bella** » Tue Dec 16, 2003 2:34 pm

have got a coily with bundera diffs and control arms, 35s etc,it has zero flex are the toyota bushes to stiff and binding?uses same 2 inch springs and shocks as before but it used to cross up fine with the standard axles and control arms

Post by **Damo** » Tue Dec 16, 2003 2:37 pm

Prolly need to see some pics of it to be of any help to ya.

Post by **greg** » Tue Dec 16, 2003 2:44 pm

Damo wrote:Prolly need to see some pics of it to be of any help to ya.

I think just hearing what is under this truck we will want to see pics regardless of whether or not we will be helping

Post by **Damo** » Tue Dec 16, 2003 2:45 pm

greg wrote:
Damo wrote:Prolly need to see some pics of it to be of any help to ya.

I think just hearing what is under this truck we will want to see pics regardless of whether or not we will be helping

Shhhhhhhhhh, we wont get to see pics if we dont look like we wanna help out

Post by **mud4b** » Tue Dec 16, 2003 2:50 pm

i was thinking the same......

BRING ON THE PICS!!!!!!!!!

Post by **greg** » Tue Dec 16, 2003 2:50 pm

This may be a silly idea, but why not remove the bushings and cross the car up - see if that improves the flex - then you will know that it is the bushings that you need to do something about right.

Note: obviously you shouldn't be driving it very far or fast with no bushings to be sensible about it. :!:

Post by **mud4b** » Tue Dec 16, 2003 2:57 pm

PICS!

Post by **bella** » Wed Dec 17, 2003 2:34 pm

pics once i sort scanner out

Post by **mud4b** » Wed Dec 17, 2003 2:42 pm

on with it.......

Post by **skippy** » Wed Dec 17, 2003 3:13 pm

it's be an hour now......you got that scanner working yet?

Outer Limits 4x4 Board

suspension problems

suspension problems

Who is online