professor wrote:Hey Bart I'm booked up for a bit but if you need any bar work done let me know.
I can CAD you a design to look at before even touching any cold steel
Chad
Shep's Chassis'
What tyres are they Prof? And size thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Modified Tray...Ideas needed. Post up your pics...
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Toyo truck - I have emailed you some paint job examples - only basic stuff but might give you an idea of what it could look like.
I have also made a few suggestions regarding fitting a bike in the back, as basically its only the top bar that would stop a bike fitting in. if the bike goes backwards you might just need to shift the top rear bar forward 30cm or so. but this depends on the bike seat fitting under it. how high is the rear bar?
if its not high enough then the only option (if you want to keep the current set up) would be to have a removable top/rear bar - it would weaken the set up a bit but again i have emailed a pic of a way that might not be to bad.
hope it helps.
when you mod it re post so we can all see how it went.
If yor going to paint it round off your guards first it will look less harsh.
thehanko
I have also made a few suggestions regarding fitting a bike in the back, as basically its only the top bar that would stop a bike fitting in. if the bike goes backwards you might just need to shift the top rear bar forward 30cm or so. but this depends on the bike seat fitting under it. how high is the rear bar?
if its not high enough then the only option (if you want to keep the current set up) would be to have a removable top/rear bar - it would weaken the set up a bit but again i have emailed a pic of a way that might not be to bad.
hope it helps.
when you mod it re post so we can all see how it went.
If yor going to paint it round off your guards first it will look less harsh.
thehanko
It did take alot of stuffing around only because it was an after thought, but it is pretty simple. Even without seals of any kind it seems to be very water proof. Rough idea on size, it fits a coke can upright and can hold about six slabs unpacked into six packs, so there is a fair bit of room, tray is also lifted 50 mm. PM sentthehanko wrote:Slight hijack dude - sorry, but that lock box in the tray is awsome - my single cab has so little room so I always have stuff sitting in the back. how much stuffing around did it take to make the box in the tray.
well done
look like iroks to me,jet-6 wrote:professor wrote:Hey Bart I'm booked up for a bit but if you need any bar work done let me know.
I can CAD you a design to look at before even touching any cold steel
Chad
Shep's Chassis'
What tyres are they Prof? And size thanks
39s maybe?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Thanks to thehanko for your mad photo-shop skillz.
those pics are good, and you have given me a few more ideas for
the tray. Thanks for that mate. I will reply to your email today.
ruff, I like the bottom half of the tray, its the roll-bars I don't like so
much. they are good for rollovers when wheeling, but are a bit restrictive
at other times.
richo, maybe if you can help me rebuild the rollbars at the back for now
to make it look a bit neater/nicer. Have you got a bender still though?
and you may have paid me out...but this tray has stood up to the test!
Cheers,
Bart
those pics are good, and you have given me a few more ideas for
the tray. Thanks for that mate. I will reply to your email today.
ruff, I like the bottom half of the tray, its the roll-bars I don't like so
much. they are good for rollovers when wheeling, but are a bit restrictive
at other times.
richo, maybe if you can help me rebuild the rollbars at the back for now
to make it look a bit neater/nicer. Have you got a bender still though?
and you may have paid me out...but this tray has stood up to the test!
Cheers,
Bart
The Lux is back. New and Improved v2.0!
Who is online
Users browsing this forum: No registered users and 31 guests