Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

where to put auto oil temp sender on GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 20
Joined: Sun Apr 24, 2005 9:44 pm
Location: grafton nsw

where to put auto oil temp sender on GQ

Post by MQCRAZY »

Hi all Im trying to fit an automatic transmation oil temp gauge to my GQ but cant find anywhere on the box to put the sender hoping someone has done this and can tell me where it goes. Thanks
Cheers Gary...
Top
AJS
Posts: 79
Joined: Sun Mar 20, 2005 10:51 am
Location: Exmouth WA

Post by AJS »

You need to remove the banjo bolt from the outlet pipe on the RHS of the tranny and drill and tap a 1/8 NPT hole thru the centre. You need to buy a short button style sender unit so that when you screw it in, the sensor doesnt obstruct the oil hole to the banjo union. I've got the VDO part numbers somewhere, or just google Whittakers Fleet Solutions for the catalogue. If you're really keen you can put another sender unit in the engine sump and run the two wires to a two way switch so that you can read engine and tranny oil temps off the same gauge.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Call Rodney at Wholesale Automatics in Bayswater Vic. He sells and fits them to Patrols.
Top
AJS
Posts: 79
Joined: Sun Mar 20, 2005 10:51 am
Location: Exmouth WA

Post by AJS »

bogged wrote:Call Rodney at Wholesale Automatics in Bayswater Vic. He sells and fits them to Patrols.
He'll either tell you to do what I did, or sell you the drilled and tapped bolt and sender unit.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 109 guests