Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Series leaf suspension

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Michele wrote:Serious(ly)?
:D

Sam,post pics of the S1 in current state!
How's it going Sam, this jigger must be about finished by now! :lol:
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Slunnie wrote:
Michele wrote:Serious(ly)?
:D

Sam,post pics of the S1 in current state!
How's it going Sam, this jigger must be about finished by now! :lol:
What he said :D

Btw - this may be of some use:
Image

And if you want to design the springs you want - rather than just bolting stuff together to see what happens ;) The leaf spring rate equation is ( from a post on AULRO):

k = 8.E.n.w.t^3 / 3.L^3 * SF

Where:
k = spring rate (lb/in)
w = width of leaves = 2.5" for all SII/IIA/SIII
n = number of leaves
t = thickness of leaves (when spring packs have different thicknesses - need to calculate a few times for each group of leaves of the same thickness)
L = length of MAIN LEAF - eye to eye, with the main leaf completely flat (See SIII manual a page or two back for those values)
SF = stiffness factor (basically a fudge factor to get the equation to fit real results) - for square cut leaf ends SF = 1.08 for Series FRONT springs and 1.13 for HD and Xtra HD REARS.
E = young's modulus. Which for steel is:
3.05x10^7 lb.in^-2 or 2.1x10^11 N.m^-2
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 207
Joined: Tue Oct 05, 2004 7:52 pm
Location: Italy

Contact:
Contact Michele

Post by Michele »

Any hope to see anything before I fly down in 2009 to visit Ben
:finger: :D
Slunnie wrote:
How's it going Sam, this jigger must be about finished by now!
I guess Sam went beyond simple leaves dimension already and fitted his own antigravitational devices instead...

He's probably orbiting over Oz at the mo trying to find the right setup...
:angel:
M
D90 Tdi The Cube II ©
www.whitedogrover.com
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest