Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
is this bodgy??
Moderators: toaddog, Elmo, DUDELUX
is this bodgy??
a long story short...
my 2L powered 86 lux doesnt like starting in the mornings so i assumed the glowplugs were farked, so i went and bought new glowplugs, went to my mechanic who told me the plugs were fine, he put a test light on them to show me the lack of power going to the plugs from the relay in the engine bay, so we traced the wires and found the problem in the relay itself, so we took the wire that runs from switch under dash to spotlights on front bar and wired straight to glowplug relay.
so now, when i want to start car, i turn on ignition, flick switch for spottys (i mean, glowplugs), start engine (which now starts perfectly every time), then turn off glowplug switch (although, glowplugs turn themselves off automatically), and away i go.
i can always wire spottys up again so that doesnt bother me.
is this bad?? am i gonna do any damage to my engine??
what are your thoughts??
thanks
my 2L powered 86 lux doesnt like starting in the mornings so i assumed the glowplugs were farked, so i went and bought new glowplugs, went to my mechanic who told me the plugs were fine, he put a test light on them to show me the lack of power going to the plugs from the relay in the engine bay, so we traced the wires and found the problem in the relay itself, so we took the wire that runs from switch under dash to spotlights on front bar and wired straight to glowplug relay.
so now, when i want to start car, i turn on ignition, flick switch for spottys (i mean, glowplugs), start engine (which now starts perfectly every time), then turn off glowplug switch (although, glowplugs turn themselves off automatically), and away i go.
i can always wire spottys up again so that doesnt bother me.
is this bad?? am i gonna do any damage to my engine??
what are your thoughts??
thanks
MrsForby wrote: Oh I desperately truly love the taco.
Note exactly sure what you mean, but I rooted my glowy relay in an underwater mishap and instead of replacing it etc, my auto sparky just wired in a push button on the dash to operate the glowies. I just hold em in for a few seconds then start er up, no probs. Think is sort of the same as yours. If so won't damage anything I reckon. As long as the glowies turn off, you should be sweet.
It's a simple fix for an expensive and common problem. It's not factory so in that context yes it is bodgey however the only real problem with what he has done is that he wired it to your existing spottie switch instead of putting in a seperate push button type switch.
TD 80 Series, F&R Lockers, Winch etc
Who is online
Users browsing this forum: No registered users and 62 guests