Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rangie Maxi drive front axle

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 6
Joined: Mon Apr 24, 2006 8:04 pm
Location: Australia

Rangie Maxi drive front axle

Post by Bog Hole »

I am looking for a front maxi drive axle. The short side 24 spline both ends. Torn the end off mine on the weekend. :P
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 231
Joined: Mon Dec 20, 2004 9:43 am
Location: lost in my pile of parts

Post by Tim D »

Look up

Hytuff engineering ?

Barry at carrara

He makes them.
Top
Posts: 6
Joined: Mon Apr 24, 2006 8:04 pm
Location: Australia

Post by Bog Hole »

I will have to check, I know that the end I tore off was 24 but I will have to check the end that goes into the maxidrive locker.


cloughy wrote:Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Bog Hole wrote:I will have to check, I know that the end I tore off was 24 but I will have to check the end that goes into the maxidrive locker.


cloughy wrote:Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:
If it was the CV end that snapped, it's likely its 23 spline, anyway, contact Hytuff engineering and you should be able to purchase 1, keep in mind, IF its an early maxi, it will be 28 spline at the diff centre, later is 24, so make sure you get the spline count right before you order :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 6
Joined: Mon Apr 24, 2006 8:04 pm
Location: Australia

Post by Bog Hole »

Cheers for that I going to pick the car up tomorrow.
cloughy wrote:
Bog Hole wrote:I will have to check, I know that the end I tore off was 24 but I will have to check the end that goes into the maxidrive locker.


cloughy wrote:Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:
If it was the CV end that snapped, it's likely its 23 spline, anyway, contact Hytuff engineering and you should be able to purchase 1, keep in mind, IF its an early maxi, it will be 28 spline at the diff centre, later is 24, so make sure you get the spline count right before you order :D
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests