Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Better Seats!

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 194
Joined: Sun Oct 08, 2006 11:07 pm
Location: Brisbane

Post by mick85 »

thanks misery!! lexplay what do the gti seats look like when fitted in?

thats the kind of idea im leaning towards trying to stay away from sports seats and something like gti comfortable buckets! :cool:
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Post by Potter »

There is a place at the high end of moss st on kingston rd that sells seat out of the imports for $2-400 a pair depending on what car they came out of. last time i looked they had r34Gtr seat pulsar ect might be worth a look there
Posts: 194
Joined: Sun Oct 08, 2006 11:07 pm
Location: Brisbane

Post by mick85 »

thanks, ill keep my eyes open and use the phone book! :P
Posts: 564
Joined: Wed Apr 19, 2006 4:55 pm
Location: Brisbane

Post by Potter »

i drove past them today the shop is Asia or Asian auto spares cant remember
Posts: 145
Joined: Mon Jul 23, 2007 9:54 pm
Location: perth WA

Post by lexplay »

here are some pics of my car with the GTi seat in.
Image
Image
also look good from the back.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Just be careful with seats from wreckers:

Some of the popular japanese seats are from lightweight cars that have correspondingly light seats. They can be quite worn by the time they have reached us.

Also, seats may have been damaged as a result of the accident that wrecked the car. This damage might not be obvious and have nothing to do with physical wear due to age/use.

Always check that a seat is tight and that slides etc lock properly. It might not be possible to do this unless the seat is bolted down.

Check that the seats haven't been hacked into some other car if buying privately. The threaded bolt holes in the seat bases need to be in good condition as they can't easily be repaired.

Also, Recaro's seem to really hold their value (as they should, they're the finest seats in the world) but they too can be worn beyond feasible repair. any significant looseness in the backrest is likely to be due to wear in the recliner mechanism and is not really repairable. Don't get caught paying $400+ for a pair of worn out seats.

However, at least with recaro, there are agents in most cities that can recondition/repair the seats.

As an aside, we buy our shoes and clothes to fit us but very few people think of buying a seat to fit. Generally, seats in road cars are designed for the 96th percentile so they won't be very supportive if you have, say, a 32" waist. When buying an aftermarket seat, you're looking far a seat that FITS you.

As an example, Recaro fixed back seats come in a range of sizes - mine won't fit anyone with over about a 34" waist, but it's the most comfortable seat I have ever owned.

Just some thoughts.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: Better Seats!

Post by greg »

mick85 wrote:... am looking for something with cloth trim as its more comfortable and that you can spend the day in wheeling without feeling shit when you get home!!
Just a suggestion from someone that has had stock sierra cloth, stock sierra vinyl and slightly better than stock monza cloth...

Can I suggest that running a cloth seat of any value in a soft top sierra would be similar to running carpet or aircon in the same car - more trouble than it's worth, and it will cause you to miss out on half the point of driving a car with no roof.

Certainly in the conditions my driving is done in - if you can't hose out the car at the end of the day (or 4 weeks later in my case), then fitting a cloth seat would be a disadvantage. both due to being a pain to clean, and also because you will be spending all your time trying to keep your dirty feet off them - i.e. it will be much harder to climb accross the car.

My suggestion - given that you appear to be keen for something more bucket like (i.e. "sporty") - make sure it's something you can clean easily. i.e. buy any seat you like and get it recovered in canvas.

P.s. just to be even more difficult - IMVHO - buckets suck for trail driving because they are a pain to get in and out of when you spend the whole day in and out of the car...

Flame away you comfy cloth seat no doors no roof drivers :D
DMA Founding Member #1 - Now Retired
Posts: 242
Joined: Tue Oct 09, 2007 9:54 pm
Location: Brisbane

Re: Better Seats!

Post by ScrawnC »

greg wrote:P.s. just to be even more difficult - IMVHO - buckets suck for trail driving because they are a pain to get in and out of when you spend the whole day in and out of the car...
This was the reason I took the one-piece fibreglass seat out of mine, nice once you are in but what a pain getting in and out... especially when you are on a bad side lean!!
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I like my buckets due to the support, especially when doorless or running low 1/2 doors, but do admit they can cause bruising around the ribs after lots of rough driving and there is a real knack to getting in and out (I'm running Sparco Sprints) However both times I've been over in my car neither me or my passenger have even moved in their seats, so the safety benenfits of fixed back buckets can't be underestimated.

Unforunately sierras aren't big enough to run the US style "suspension" race seats made my Beard, PRP and Mastercraft (as examples) ehich are much better suited to off road work.

Note too that the cloth favoured in most race seats REALLY traps debris like dead leafy twig bits etc that can make for an itchy drive home if you've been running door/windowless, so the canvas reupholster is a great idea.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Gwagensteve wrote: However both times I've been over in my car neither me or my passenger have even moved in their seats, so the safety benenfits of fixed back buckets can't be underestimated.
Having been on the high side on one of the times Steve is referring to I can vouch for how well I stayed in the seat. I have just got a pair of fixed back seats for my Sierra but this was also partly due to their thin back and the lack of space in a ute. The Recaro's I have in the Vit are too big for the Sierra and I didn't want to be that intimate with the steering wheel although they have also kept me in my seat nicely when I have been on my side.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 3
Joined: Sat Dec 16, 2006 7:42 pm
Location: western sydney, NSW

Post by joyride »

can anyone point me to what stock seats from other cars can fit into a swb vitara?
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

joyride wrote:can anyone point me to what stock seats from other cars can fit into a swb vitara?
Nissan Pulsar or the equivalent Holden Astra aren't too bad.
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

want33s wrote:
joyride wrote:can anyone point me to what stock seats from other cars can fit into a swb vitara?
Nissan Pulsar or the equivalent Holden Astra aren't too bad.
thats what i have put in the new LWB. They are very comfy and have a bucket style feel to them, and most of all they will be cheap as chips.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Posts: 3
Joined: Sat Dec 16, 2006 7:42 pm
Location: western sydney, NSW

Post by joyride »

i think i know the seats youre talking about, they are from 84-87 models (N12?) and are super comfy!! did you keep the vitara rails and slip the pulsar seats on it, or used the pulsar rails?

another thing, can i legally remove the rear seats from my SWB without an engineering cert?
Posts: 677
Joined: Sat May 14, 2005 7:22 pm
Location: Melbourne

Post by foolsp33d »

joyride.. on your ID plate under the bonnet... is it a classified as a two seater!?? id see no hassels about removing the rear seat in any case.. but i dont know alot... :lol:
[quote="-Nemesis-"][quote="bj on roids"]whens the aussie one start?[/quote]

A few episodes before they can it? :lol:[/quote]
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Re: Better Seats!

Post by Dee »

greg wrote:
mick85 wrote:... am looking for something with cloth trim as its more comfortable and that you can spend the day in wheeling without feeling shit when you get home!!
Can I suggest that running a cloth seat of any value in a soft top sierra would be similar to running carpet or aircon in the same car - more trouble than it's worth, and it will cause you to miss out on half the point of driving a car with no roof.
exactly why I've still got my vinyl stockers.
Not so great on the kidneys, but neither is beer & i still drink my share... :P
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

joyride wrote:i think i know the seats youre talking about, they are from 84-87 models (N12?) and are super comfy!! did you keep the vitara rails and slip the pulsar seats on it, or used the pulsar rails?

another thing, can i legally remove the rear seats from my SWB without an engineering cert?
i fitted them to standard rails, minor modification needed, extra hole here, spaced up here etc.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests