). My 4m40 needs 5.5 litres for just sump. 6.5 for filter as well and another 1.3 for the oil cooler.My question is: where is the oil cooler and how do I change the oil it?
It's a 2.8 non-turbo diesel.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine oil capacity question
Moderator: -Scott-
Engine oil capacity question
I change the oil at 5000 interval and new filter at 10,000 ( I know i should do the filter every 5000 so don't lecture me ). My 4m40 needs 5.5 litres for just sump. 6.5 for filter as well and another 1.3 for the oil cooler.
My question is: where is the oil cooler and how do I change the oil it?
It's a 2.8 non-turbo diesel.
). My 4m40 needs 5.5 litres for just sump. 6.5 for filter as well and another 1.3 for the oil cooler.My question is: where is the oil cooler and how do I change the oil it?
It's a 2.8 non-turbo diesel.
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
I am going to lecture you.
If you can't change both oil and filter, rather change the filter every time and the oil every second time.
The 4m40 and 4m41 engines have a oil cooler in the engine block, but it should drain (albeit slowly) if the filter is removed.
Some models have a supplementary oil cooler in front next to radiator (follow the pipes).
If you can't change both oil and filter, rather change the filter every time and the oil every second time.
The 4m40 and 4m41 engines have a oil cooler in the engine block, but it should drain (albeit slowly) if the filter is removed.
Some models have a supplementary oil cooler in front next to radiator (follow the pipes).
1989 LWB Exceed
3.2 DiD
5-spd manual & SuperSelect
2" body lift
33" Bridgestone D694 ATs
Front Runner Roof Rack
Bilstein Shocks
3.2 DiD
5-spd manual & SuperSelect
2" body lift
33" Bridgestone D694 ATs
Front Runner Roof Rack
Bilstein Shocks
shouldnt all (most) of the oil come out at once?
once you take off the drain plug on the sump it all should come out.
i didnt think there were seperate drain plugs for each
i just drain my oil when its hot and i get most of it out.
once you take off the drain plug on the sump it all should come out.
i didnt think there were seperate drain plugs for each
i just drain my oil when its hot and i get most of it out.
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
In other words if I wait long enough for it to drain then the extra 1.3 litres from the cooler will come out? I usually wait at least 20 mins and the flow has stopped, and when I put fresh oil in all I do is pre-measure the amount (5.5 for sump + 1.0 for filter) and it fills to the right mark on the dipstick every time.4ePajero wrote:I am going to lecture you.
If you can't change both oil and filter, rather change the filter every time and the oil every second time.
The 4m40 and 4m41 engines have a oil cooler in the engine block, but it should drain (albeit slowly) if the filter is removed.
Some models have a supplementary oil cooler in front next to radiator (follow the pipes).
So if the cooler drains as well then shouldn't I be adding another 1.3 l?
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
Where the oil cooler is on a Paj it should all run out....
Actually now thinking about it, It might not. Becasue otherwise it would all run out of the cooler into the sump when you turn the engine off. Thus putting over a litre extra into the sump and providing a false reading.
Ah - Im confusing myself.
Just put oil in it, forget the cooler, warm it up, check the dipstick in the morning, add more if necessary. Thats what i was trying to say!
Actually now thinking about it, It might not. Becasue otherwise it would all run out of the cooler into the sump when you turn the engine off. Thus putting over a litre extra into the sump and providing a false reading.
Ah - Im confusing myself.
Just put oil in it, forget the cooler, warm it up, check the dipstick in the morning, add more if necessary. Thats what i was trying to say!
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
It's due for a 150,000 service and new injectors next week from Mitsubishi so I'll ask them.
Then again they might say go to hell because I do my own oil changes and not give them the chance to rip me off on the price they charge for workshop oil.
Then again they might say go to hell because I do my own oil changes and not give them the chance to rip me off on the price they charge for workshop oil.
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
Who is online
Users browsing this forum: No registered users and 0 guests