Been looking for a while on here and other forums and I can't seem to find much information on tuning the idle on a 300a mixer.
Can anyone breifly run through the procedure? I have it running now but the throttle stop is screwed quite a way in from where it used to be so needs a bit of work!
Also, the idle screw seems quite sensitive. If i just press the screw driver against it, it seems to alter the idle. Is this normal?
I also read the screw that covers the idle screw was just a dust cover but this doesn't seem to be the case when i pulled the inlet pipe off the other day. Does anyone know what size thread it is and is it tapered?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tuning LPG 308 with impco 300a - idle
Moderators: toaddog, TWISTY, V8Patrol, Moderators
I usually only play with blown systems, and never with the 300A's as they dont work blow through, but with most of the impco stuff the idle mixture is VERY sensitive, 1/30th of a turn can put it out, literally. You shoul dbe able to get it in the ball park, whatever idles smoothest is usually fairly close.
Many remove the standard screw and tap a finer thread, that helps.
Dont worry about the idle too much, as long as cruise and WOT mixtures are good, generally the idle mix screw is more used to trim the cruise mixtures, so it can be a compromise.
Many remove the standard screw and tap a finer thread, that helps.
Dont worry about the idle too much, as long as cruise and WOT mixtures are good, generally the idle mix screw is more used to trim the cruise mixtures, so it can be a compromise.
Who is online
Users browsing this forum: No registered users and 127 guests