Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

At what rpm does an alternator generally make max current

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 25
Joined: Fri Apr 20, 2007 3:15 am
Location: Geelong, Victoria

At what rpm does an alternator generally make max current

Post by GQRob »

and at idle how much current as a percentage of max current is being produced?

ie. max current at 2000rpm and 25% at idle

I've got a td42 patrol with stock alternator, but I think the figures will be about the same for most vehicles

Thanks
Rob
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Post by fazza81 »

Depends every alt has a different torque curve.
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

GQRob wrote:and at idle how much current as a percentage of max current is being produced?
Have you heard about the Internet yet?

The internet, even Google is your friend!

I would be happy to get on the net and do some research for you?

Just send me a PM and I will do some searching for you!
I'm the sharpest tool in the shed!
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

True Story!

Because I was feeling guilty about being a smart=ass, I did a search myself and look at the time it took to find the answer and type this, using Google and the words - alternator output rmp, I found and read, then posted this -
http://www.rpc.com.au/products/batterie ... arfaq5.htm

EDIT, I cant believe it was 7 minutes.
I'm the sharpest tool in the shed!
Posts: 25
Joined: Fri Apr 20, 2007 3:15 am
Location: Geelong, Victoria

Post by GQRob »

thanks for the reply's, I thought there might be a "nominal" figure or perhaps someone may have already tested a stock one. When I get a chance I will test mine and post some results.

Rob
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

GQRob wrote:I thought there might be a "nominal" figure or perhaps someone may have already tested a stock one.
Hey Rob, I'm guessing there is an "indusrty standard", for comparritive purposes.

Then there is the individual vehicle requirements, as you may be aware, like power taken away from the engine relative to the torque required to move the car, retain current speed and fuel consumption. The formulas for each vehicle would be varied and complicated.

As for someone testing one and giving you the results, it may not be perfect. How does one measure the result attained after recording the results?
I'm the sharpest tool in the shed!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

As each application is different there's no industry standard - manufacturers publish typical output curves of the alternator but this of course doesn't give the full story as pulley ratios are also required.

These ratios are governed by obvious things like engine RPM range and desired charging current at idle but also some less obvious ones like alternator noise.

Also the curves are NOT linear.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

So, how long is a piece of string?
I'm the sharpest tool in the shed!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Is it metric or imperial string....... :)
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

LH or RH twist?
I'm the sharpest tool in the shed!
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

v6hilux wrote:So, how long is a piece of string?
chimpboy wrote:This long: |<------------------------------------------------------------->|

(not to scale)
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

-Scott- wrote:
chimpboy wrote:This long: |<------------------------------------------------------------->|

(not to scale)
I know the arrow head tips are supposed to be touching the lines, so that is not the correct length!
I'm the sharpest tool in the shed!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests