Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Defender 200tdi turbo replacement

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 25
Joined: Fri Apr 20, 2007 3:15 am
Location: Geelong, Victoria

Defender 200tdi turbo replacement

Post by GQRob »

Hi, I've done a bit of searching but couldn't find the info I was looking for.

My brother in law has a 1992 defender tdi and the turbo is on it's last legs (little boost and major shaft play). He's talking about getting it rebuilt, but I was thinking there may be an "upgraded" unit he could buy instead. The stock turbo is a garrett, non watercooled, non ball bearing. I know on other vehicles such as nissan td42's they ditch the stock one in favor of a BB turbo.

Is this a done thing on the TDi's also or should he just get the stock one rebuilt? What type of flange is used on the defender 200tdi's? Any advice would be greatly appreciated.

Rob
Top
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

from another forum on a 300 TDi
It also has a water cooled turbo from some nissan zx350


if no-one here can help LRUK may be worth a look
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

The stock one is a garrett T2/T25 and they're dirt cheap to rebuild. A rebuild kit off ebay is under $100 and you can put it in yourself if the shaft is still in good condition.

It'd be worth rebuilding to keep as a spare even if you're upgrading.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 28 guests