Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mother in law came over today and asked me to take a look at a squeek in the front end of her KIA Sportage.
While I was under there I noticed it had power steering and the box is about the same size as Vitara & Jimny.
Its mounted outside the chassis rail but could be made to fit on the inside with an adapter. It uses four bolts to hold it on. Pitman arm is about the same length as Sierra too! (Although I didn't have a tape so couldn't measure it) Has anyone else seen these or tried to fit one to a Zook?
Once you are talking about converting an outboard mounted box to an inboard box via adapter plates etc I wouldn't bother.
IMHO the "perfect" sierra steering box is a LHD 2WD hilux box.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
