Hi people.
My little bro has just purchased a Magnum 8k winch and wants to fit it to his 80 series.
His bull bar looks like a stock alloy one, but has cut outs for a winch.
What we want to know is, whats involved in fitting the winch?
We're aware that an alloy bar is not ideal to winch off, and a steel frame/cradle is required. Has anyone got any pics of these frames? has anyone made one? He's going to make up his own cradle, but would be good if he could get some design ideas first.
Thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fitting winch to stock 80 series alloy bar??
Moderators: toaddog, Elmo, DUDELUX
Master of my own domain
Who is online
Users browsing this forum: No registered users and 2 guests