Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body or spring lift
body or spring lift
i have a 87 sj50 swb. i want to fit 31 inch yokohamas on it and was wondering what would be the wat to go in regards to fitting a body or spring lift, which one is easier to do? before it was purchased(2 months) it had recently had new stock springs fitting. was wondering if anyone with a bit of knowlegde could let me no. cheers
I'd go the bodylift. If you have new stock springs and a 2 inch bl plus seam bashing and cutting off/trimming the bumper outriggers on the chassis you clear the 31s. 84zooksta had stock springs, 3 inch bodylift and cleared 31" simexs which are a 32"+ tyre.
give it a go on the stock springs and see how you go. will keep COG low. but if you have the cash see above! (want33s)
give it a go on the stock springs and see how you go. will keep COG low. but if you have the cash see above! (want33s)
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
I'll just add the fact that some suspension lifts will improve the ride quality of the vehicle. A body lift will have no effect. Are you happy with the current ride? If it doesn't bother you the bodylift will probably do fine.
Body lift will be cheaper (quite a bit compared to a full on suspension kit), and both will probably take similar time to fit. Though I think a body lift would be hard to do with just one person and no hoist (or block). Suspension is easy to do with a hydraulic jack and the more car stands the better. I find 5 car stands makes it a breeze, 2 for chassis, 2 for axle, and one to support the pinion flange.
Body lift will be cheaper (quite a bit compared to a full on suspension kit), and both will probably take similar time to fit. Though I think a body lift would be hard to do with just one person and no hoist (or block). Suspension is easy to do with a hydraulic jack and the more car stands the better. I find 5 car stands makes it a breeze, 2 for chassis, 2 for axle, and one to support the pinion flange.
Wheeling on completely wicked angles, without even looking stable.
Welcome Scibe,
It's well worth reading through the bible, lots of useful info. Feel free to post in any of those threads with questions you have, if they're new questions feel free to start a new thread.
http://www.outerlimits4x4.com/ftopic487 ... 0cc72513fc
Cheers
james
It's well worth reading through the bible, lots of useful info. Feel free to post in any of those threads with questions you have, if they're new questions feel free to start a new thread.
http://www.outerlimits4x4.com/ftopic487 ... 0cc72513fc
Cheers
james
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Who is online
Users browsing this forum: No registered users and 8 guests