Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I have a 2L motor which i think is either 1982 or 1983 which has cam followers and a front gernal (sp?) which leaks oil when its idling, and also a 1987 2L motor which has a good camshaft and roller rockers.
What i want to know is can I put my roller rockers and the cam from the newer motor straight into the older motor without any dramas?
I know ill have to change the pulleys and get a new timing belt, ive got that part sorted.
tojo_runner wrote:will it physically not fit or will it foul when we try to turn it over?
As far as im aware the cam and rockers physicaly will not fit. But i could be wrong. If 2 seperate Mechanics are telling you it can be done then there is a good chance i am wrong.
