Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

i want to run 33's on my 96 lux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5
Joined: Sat May 10, 2008 9:37 pm
Location: central NSW

i want to run 33's on my 96 lux

Post by tippy »

hi could any one give me some info on running 33's at this time it has 2" lifted springs i plan on getting a set of extended shackles will this be enough. if it is will i need to change any steering components beside the toque rod .
Top
Posts: 42
Joined: Wed Apr 16, 2008 1:10 am
Location: Perth

Post by Grimey »

pretty sure i read that 2" body and/or suspension will be enough for 33s
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

31" MTZ's on my 92 lux scrub on the mudflap when you turn under compression- you'll need more lift to clear them, or some love with a BFH.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 33
Joined: Thu Jan 10, 2008 2:42 pm
Location: Canberra

Post by a-frame81 »

I have 33's on my solid front 4 runner, you'll have to add more lift or as ferrit said take to them with a BFH.
The other option I've heard about is to relocate the axle on the leaf pack an inch or so forward and add a drive shaft spacer. I'm not sure if it would mean you have to alter steering components or not....
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

a-frame81 wrote:The other option I've heard about is to relocate the axle on the leaf pack an inch or so forward and add a drive shaft spacer. I'm not sure if it would mean you have to alter steering components or not....
Yeah shorter draglink and torque rod with the longer shaft re drilling the perches will get you 35mm foward can run 35's but they give the guards some love
plenty of parts on the bench
Top
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

im running 2 and 2 and the 33's clear fine. 35's hit on the springs.
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Posts: 5
Joined: Sat May 10, 2008 9:37 pm
Location: central NSW

thanks for your help

Post by tippy »

also iwas told i may need spring wedges does any one know what % to use with 2" springs+2"shackles
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Re: thanks for your help

Post by Weiner »

tippy wrote:also iwas told i may need spring wedges does any one know what % to use with 2" springs+2"shackles
Think I got either 3 or 5 degrees of plates in the front of mine, will find out for sure if needed.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 5
Joined: Sat May 10, 2008 9:37 pm
Location: central NSW

Post by tippy »

that would be great if you could thanks
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests