Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3in lift on 80 series - will it fit 35s ok????

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 443
Joined: Tue May 13, 2003 11:02 am
Location: Melbourne

3in lift on 80 series - will it fit 35s ok????

Post by Luxy »

Hi guys.

Should be picking up a 80 series tomorrow. - hang on, its after midnight..... today.... yippee!!! :D :D :D :armsup:
The suspension is sagged a bit and I will be replacing it soon with new springs and shocks.
Hoping to put a (ironman) 3in lift in the ol' girl.
Will this clear 35in (centipede) tyres????
It will be running around on 265s or 285s tyres most of the time, just deciding what size tyres to use as my every day runabouts.
Still uncertain with the runabout size, but I will not be putting anymore than 35in tyres for play time.

Just wanting to know if this will mostly clear everything ok, and will it look to weird at all with 265s on a 3in left.
More after a touring vehicle than a hardcore one, but would like the play tyres (35s) to fit at the same time.

Thanks in advance!
Phil
_____________________________________
If at first you DO succeed, try not to look astonished!
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

I have 2" lift, 35's in a DX with no flares, no mud flaps and very little offset on the rims and it doesn't touch.

I believe it the offset rims and mud flaps that make them rub.

Cheers Joel
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 178
Joined: Fri May 05, 2006 6:57 pm
Location: SE melb

Post by Coogs »

I run a 3in Ridepro lift with a set of 50mm bumpstop spacers,
My road tyres are 265/75/16s and my play tyres are 35/10.5/16s
all good no rubbing. :armsup:
95 80s gxl 4.5 pet/gas (4 play)
85 MWB73 350chev pet/gas (4 project)
98 TJ Wrangler (4 Wife)
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

what sort of 80?

how much?

what spec?
hands and mums dont count!!!
Top
Posts: 443
Joined: Tue May 13, 2003 11:02 am
Location: Melbourne

Post by Luxy »

It will be for a 96 DX cruiser.

My brother works at a tyre place and said he can get discounted stuff, so I gave him a list to get back to me with prices.

It has a winch bar (possible winch soon), with a standard rear bumper but looking to get a rear wheel carrier on it.
If I fine a rear bar though with tyre carrier on it at the right price I might get that also.
_____________________________________
If at first you DO succeed, try not to look astonished!
Top
Posts: 943
Joined: Sun Aug 24, 2003 2:42 pm
Location: Launceston

Post by Bluey »

should fit. i've got a 95 gxl with 3" dobinsons, tried some 36 simexes yesterday and they fit. had to remove mudflaps and will be making bump stop extensions. i say go for it


check out this thread for some pics

http://www.offroad80s.com/viewtopic.php?t=581&start=15
Top
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Contact:
Contact Tapage

Post by Tapage »

I say yes also ..

2.5 - 3" lift

Maybe you need to down few inches the bump stops .. but nohting more ..
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Top
Posts: 96
Joined: Fri Apr 09, 2004 9:24 pm

lift

Post by dubs »

I have a 3 inch lift and 16 inch rims at 15mm offset and run 315 radial claws.They only just just touch under full flex.I have some flares on it as the tires stick out 50mm from the body.Im very happy with the ride and height is tops for every day use.
Top
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

Ok just to double check, sorry to hijack.

At the moment i have 5" lift and i run 33's as daily tyres and have 35x11.5x16 Simex Centerpede's (et2') fitted to Factory GXL 16" steel wheels, for play. I am wanting to start a bit of camping/beach driving as well as a bit of hard playing. So i want to keep the 35's for play but want to lower the cruiser to 3". I am looking at the dobinson 3" variable springs, which have the same free height as my 5" coils, so flex is still there. but what i want to know is with the 35's if i lower the bump stops will the rear tyres still grab the flares?
what are peoples thoughts

Cheers Troy
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Posts: 75
Joined: Sun Aug 08, 2004 11:46 pm
Location: Perth

Post by tuffer_2.4 »

i run 35x13.5s on standard cruiser offset rims with a 3" tough dog lift and its close to rubbing on the top of the flare but it never will doesnt touch any where else
Top
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Post by jsttry »

vx, I have that same rim/tyre combo with 3" tough dog lift - no issues
Top
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

Sweet as, are you guys running 3 degre castor bushes???
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Posts: 9
Joined: Tue Mar 11, 2008 9:42 am
Location: brisbane

Post by Jason V »

i run a 3 inch lift with 35inch mtz on the standard 16" rim fits no problems at all
Top
Posts: 75
Joined: Sun Aug 08, 2004 11:46 pm
Location: Perth

Post by tuffer_2.4 »

mine has no castor adjustment yet as im waiting for new arms to arrive handles like shit but doesnt scrub so with the new arms pushing the diff forward there will be miles of room
Top
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

What brand of arms?
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Posts: 75
Joined: Sun Aug 08, 2004 11:46 pm
Location: Perth

Post by tuffer_2.4 »

just snake arms
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests