Just curious, can anyone answer for me why is it when I
am full engine braking, like going down a mountain range in
say third gear at 60 clicks not using brakes, just engine
to keep speed down, why would my engine temp drop to almost
lowest point on the dial?
PS It is a 1994 widetrack Fez, extractors, exhaust, snorkel,
no real engine, cooling, driveline mods to speak of.
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engine temp question
Moderator: Tiny
They can vary a lot due to the silly design of the cooling system, however that sounds extreme. Do you know what brand of thermostat is fitted? Someone might have fitted an aftermarket one and guaranteed that will be the source of the fluctuations. Factory thermostats maintain the temperature a lot better in my experience (and can help cure overheating in Summer.)
David
Yep - that's about normal, but its not really a great thing. As murcod says thermostats are an issue but the cooling systems a pita.murcod wrote:They can vary a lot due to the silly design of the cooling system,
I've moved my thermostat to the water outlet and its made SFA difference, currently have a water pump apart and its horrible - bad impeller shape and huge clearances. Will machine up a proper impeller and see if that helps with the overheating. Can't see it helping the low temp operations but its Daihatsu so who knows ?
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
IMO you have to spend BIG money to get a good electric water pump - the Davis Craig ones do not use magnetic drive so they have a shaft seal that can leak.
The really good ones are brushless and fully sealed with magnetic drive from the motor to the impeller - making them highly reliable but very expensive.
And you need a controller on top of the pump - if I could get a Bosch one cheap I'd have it but......
The really good ones are brushless and fully sealed with magnetic drive from the motor to the impeller - making them highly reliable but very expensive.
And you need a controller on top of the pump - if I could get a Bosch one cheap I'd have it but......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 16 guests