Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo or Not??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 24
Joined: Thu Mar 27, 2008 1:25 pm
Location: Port Hedland WA

Turbo or Not??

Post by Bitumen Beast »

I am thinking about putting a turbo on my cruiser. Its a '96 HZJ75 with 153000 on the clock. just wondering if the engine is too old and/or too many k's. also should I put an intercooler onto it aswell
Posts: 175
Joined: Mon Apr 28, 2008 9:10 pm
Location: imbil

Re: Turbo or Not??

Post by 60_series_united »

Bitumen Beast wrote:I am thinking about putting a turbo on my cruiser. Its a '96 HZJ75 with 153000 on the clock. just wondering if the engine is too old and/or too many k's. also should I put an intercooler onto it aswell
yeah go 4 it that not much for a diesel and i wouldnt worrie about an intercooler i was goin to put 1 on wen i put a turbo on mine but every one i talked to told me not to because i wasnt goin to be running enough boost or something like that
Posts: 5
Joined: Fri Mar 21, 2008 6:09 am
Location: Brisbane

turbo setup

Post by davidl »

I am about to fit a turbo to my eighty series with 300 000 k's. From what I can find out the main thing to watch out for is that if you get someone to fit it for you that they don't try and talk you into high boost (above 8psi) as this increases exhaust temp which leeds to engine detonation( the big bang theory). Exhaust temps of about 500 - 550 deg should be the optimum. I am not an expert so take this as advice only. Do your research and ask lots of questions, then make your choice. I am fitting mine myself and am making the parts up also. I am still sourcing the parts and hope to install in less than a day.
Cheers david
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

Do the bottom end bearings too ;)
Kind Regards,
Brad
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests