Hi,
My HJ61 import had a knock in the front end prior to me buying it. It was repaired but it seems moisture has got in between the inner and outer guards at the top of the guard as the joins opened up in the prang and the guards are rusting out all along just in line with the bonnet. Not yet visible from the outside, only when I lift the bonnet.
A panel shop has estimated $1200 to cut out the rust, weld in new angle pieces and match the grey metallic paint.
Used panels are far more interesting option to me, or new steel /fibreglass if I they are available.
My question is:
Are all 60 series front guards the same? or do the later models like mine with the four rectangular headlights have a different guard?
Comments welcome.
Thanks
Tim
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series front guards
Moderators: toaddog, Elmo, DUDELUX
The basic guard stamping is the same but the square headlight model do have different brackets permanently fixed for the park lights as well as the hole for the side mounted indicator. You can get away with round headlight guards with some mucking around if you get stuck. I have some nice round light ones here if you need them. PM me. Cheers.
Who is online
Users browsing this forum: No registered users and 4 guests