I have a sad 2H, can anyone tell me if a 1HZ will bolt striaght in to replace it or are they different.
Cheers Brian
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
75 Series Engine Swap
Moderators: toaddog, Elmo, DUDELUX
they r diferent dude, exhoust is on diferent side it uses a diferent gearbox, and engine mounts r diferent.
but i spose if u were to get hold of a h150 box out of a later model 75 and use that box and transfer it wouldnt be that hard.
but i spose if u were to get hold of a h150 box out of a later model 75 and use that box and transfer it wouldnt be that hard.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
We've got a fair few HZJ75's at work, and they run an W52 gearbox behind them like the 2H ones. (from memory, would have to check on monday)
the HZJ79's run a R151 behind the HZ.
the HZJ79's run a R151 behind the HZ.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
w52 is a hilux box i think? The 2H uses the H55f. I thought the 1HZ's used the H55f as well, only with a different bellhousing and input shaft?ferrit wrote:We've got a fair few HZJ75's at work, and they run an W52 gearbox behind them like the 2H ones. (from memory, would have to check on monday)
the HZJ79's run a R151 behind the HZ.
Engine mounts (as well as wiring/plumbing, obviously) have to be altered.
-Stu
the gearbox on a 2h also sits at an angle to the gear box cross member (9 degrees) , where a gear box on a 1hz sits flat to the gear box cross member so a later model gear box cross member would also be need to be fitted, thats if they bolt up, just jamb a v8 into it 
or just look around for a 2h, picked one up last year for my brothers truck for $300 compleate
rob
or just look around for a 2h, picked one up last year for my brothers truck for $300 compleate rob
come on move over and let the 75 through
\\ yeah, your right it its the H55Fdogbreath_48 wrote:w52 is a hilux box i think? The 2H uses the H55f. I thought the 1HZ's used the H55f as well, only with a different bellhousing and input shaft?ferrit wrote:We've got a fair few HZJ75's at work, and they run an W52 gearbox behind them like the 2H ones. (from memory, would have to check on monday)
the HZJ79's run a R151 behind the HZ.
Engine mounts (as well as wiring/plumbing, obviously) have to be altered.
-Stu
The 75 series kept the H55F gearbox when they went to the 1HZ motor, but when they went to the 79 series in 99, they fitted the R151 behind them
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
You will have to cut off the old engine mounts and weld on the 1hz ones and will have to mod the sump too.
gearbox has a different input shaft (more splines i think) think i used my old crossmember and for some reason i put the later dash cluster in.
but putting in a 2h in good nick will be easer to do.
gearbox has a different input shaft (more splines i think) think i used my old crossmember and for some reason i put the later dash cluster in.
but putting in a 2h in good nick will be easer to do.
Who is online
Users browsing this forum: No registered users and 1 guest