P38a transfer case

[Slunnie]

As you do, sitting with a beer and ponder the meaning of yen.... or zen or WTF it is.

Can the P38 Borg-Warner 44-62 transfer case be fitted with a locking CDL and is it a strong box?

Not that I will be, but just wondering if it can be locked, and if so would it be a good box for rovers that are fitting mog portals.

[bigbad]

anything can be done if you have enough money

[Slunnie]

anything can be done if you have enough money

If I have enough money, I'll never be able to make a stock rover diff handle a 460ci going flat stick while bouncing on rock with 44" tyres and 200% reduction gears.

I think you know what I'm asking.

[Loanrangie]

I thought they were viscous ? An LT230 would be a better transfer i reckon especially with the aftermarket parts available for them.

[bigbad]

I thought they were viscous ? An LT230 would be a better transfer i reckon especially with the aftermarket parts available for them.

I believe they are oposite to an lt230, drive on the left side instead of te right. Maybe thats why he wants one. If I recall from a pic the viscous is fitted on the end of the centre diff, so it may be possible to make a locking sleeve that would fit in its place and an operating lever, but wouldnt be a cheap job. But I may be wrong on that as I have only seen a pic of one.

[cloughy]

I thought they were viscous ? An LT230 would be a better transfer i reckon especially with the aftermarket parts available for them.

I believe they are oposite to an lt230, drive on the left side instead of te right. Maybe thats why he wants one. If I recall from a pic the viscous is fitted on the end of the centre diff, so it may be possible to make a locking sleeve that would fit in its place and an operating lever, but wouldnt be a cheap job. But I may be wrong on that as I have only seen a pic of one.

Exaccey, P38 is left hand drop, LT230 right hand drop

[Slunnie]

Yeah, thats exactly it. LH drop unlike the LT230.

That's quite interesting about the viscous arrangement though bigbad. I'll have to try to find an exploded diag of one and see what the possibilities are. As said though, it's just out of interest.

The other thing that made me wonder about it's strength, was when reading about it's servicing, it seemed the drive chain was a replaceable item in that transfer, which made me wonder about it strength.

[andrew e]

mogs or danas?

[bigbad]

Have a look at this http://www.4x4community.com/forum/attac ... 1188291644

[muddydigger]

I have a P38, never had to do any work to the gear box or transfer case so I cant tell you what you want to know but an intersting thing if its of any consiquence is the gear box selector and the the transfer case selector are one and the same, ie no seperate knobs!

But the P38 is bloody good off road, better than my 89 was!

[Slunnie]

mogs or danas?

Absolutely!

Have a look at this http://www.4x4community.com/forum/attac ... 1188291644

Thanks so much for this bigbad! Champion!

Just looking through that doc, I'll be really surprised if nobody currently manufactures a locking mechanism for this transfer. It would be very straight forward for a machinist as it looks like it requires a locking dog in place of the viscous unit and an activation fork like that on a maxi difflock or an LT95. Just looking at the pics, my concern would be the size of the rear output shaft where it goes into the viscous unit, but that is based on the diagrams and not any measurement.

[jbell]

I'm looking at mogs....... & on a p38, looking for the right car!!




Jeff

[cloughy]

I have a P38, never had to do any work to the gear box or transfer case so I cant tell you what you want to know but an intersting thing if its of any consiquence is the gear box selector and the the transfer case selector are one and the same, ie no seperate knobs!

But the P38 is bloody good off road, better than my 89 was!

That's because its operated by a servo motor

[muddydigger]

I have a P38, never had to do any work to the gear box or transfer case so I cant tell you what you want to know but an intersting thing if its of any consiquence is the gear box selector and the the transfer case selector are one and the same, ie no seperate knobs!

But the P38 is bloody good off road, better than my 89 was!

That's because its operated by a servo motor

Right and of course every one should of known that should they becasue; they should all be as mechanily minded as you

[cloughy]

I have a P38, never had to do any work to the gear box or transfer case so I cant tell you what you want to know but an intersting thing if its of any consiquence is the gear box selector and the the transfer case selector are one and the same, ie no seperate knobs!

But the P38 is bloody good off road, better than my 89 was!

That's because its operated by a servo motor

Right and of course every one should of known that should they becasue; they should all be as mechanily minded as you

Exactly

[Slunnie]

I can feel the love!

[cloughy]

Had the wife's P38 on the hoist today, changieng shock rubbers, looks like the VC is siezed Wonder how long till something breaks

Must find another VC

[Thommo 73]

600 for a VC some where....just cant find it atm

[cloughy]

600 for a VC some where....just cant find it atm

To dear for me, bought a P38 yet?

[Thommo 73]

yes i have got one now. 99 se and ripped off the mufflers as the first thing i did...

oh and i think 600 was a uk price

[cloughy]

How much? kays, condition? pics?

[muddydigger]

Cloughys a mechinal genius no doubt, he just forgets some of us arnt quite so mechanicaly minded , and for me its only a cse of knolledge when I have to do the work, which fortunatley for me, I havent yet . I respect the man and his knoledge, he just needs to remember some of us only have mechanical apptitude of sloths.

[muddydigger]

yes i have got one now. 99 se and ripped off the mufflers as the first thing i did...

oh and i think 600 was a uk price

Yeh make with the pics! there isnt enough P38s on the site

[cloughy]

Cloughys a mechinal genius no doubt, he just forgets some of us arnt quite so mechanicaly minded , and for me its only a cse of knolledge when I have to do the work, which fortunatley for me, I havent yet . I respect the man and his knoledge, he just needs to remember some of us only have mechanical apptitude of sloths.

Nah, no mechanical genius, just a crunt

[muddydigger]

Cloughys a mechinal genius no doubt, he just forgets some of us arnt quite so mechanicaly minded , and for me its only a cse of knolledge when I have to do the work, which fortunatley for me, I havent yet . I respect the man and his knoledge, he just needs to remember some of us only have mechanical apptitude of sloths.

Nah, no mechanical genius, just a crunt

Well I was trying to be nice but yes you were being a crunt

[Thommo 73]

no pics yet. and it's a little muddy now.
160k. 17k and i think it's in near perfect condition for it's age.(every thing works)
just needs some decent rubber under it and i just happen to have a new set of ET2's in the shed

[muddydigger]

no pics yet. and it's a little muddy now.
160k. 17k and i think it's in near perfect condition for it's age.(every thing works)
just needs some decent rubber under it and i just happen to have a new set of ET2's in the shed

I just put a set of cooper sts on mine they are great, but I have issues on entry level on full lock. I also need to replace on of the blend motors. You know they thing that sh!ts me, I cant get a Arb bar for it

[Thommo 73]

i heard some where you can modify a disco bar to fit.
i'll look into it later when i finish some of the other projects i started.
(shutup clougly)

what size coopers did you get

[cloughy]

no pics yet. and it's a little muddy now.
160k. 17k and i think it's in near perfect condition for it's age.(every thing works)
just needs some decent rubber under it and i just happen to have a new set of ET2's in the shed

So want be long before its trashed

I thin you should pull the 1UZFE out and stick it in a rangie with cruiser 5 speed now your a rover man and the coils are already there

[muddydigger]

245-75 R16

Got them through Ryan at 4bs great tyres so far.

Ive heard that the Disco bad can be altered but Im concerend about insurnace issues with the SRS airbags!