Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Your arb air Locker set up?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Your arb air Locker set up?
Hey guys ive got a 91 lux and im chucken arb lockers front and back,i was just wondering how much did it cost you to get it all done(Including the lockers compressor and all the other stuff)..A guy from tjm(yes tjm sellling arb lockers,lol)will sell me front and rear lockers with a compressor and all the switches gear,and install it for $3500 is that good?
And he said tjm dont make lockers anymore???Im must be abit slow.lol.
This isnt just a lux topic feel free to post...
Any feedback will be great,
Cheers
And he said tjm dont make lockers anymore???Im must be abit slow.lol.
This isnt just a lux topic feel free to post...
Any feedback will be great,
Cheers
$800 dollars 2nd hand, but never used for one locker. Cant remember, I think about $700 for the other locker second hand. about $100 for the compressor second hand. $150 to fit one locker to the centre, fit the other one myself. Installed both centres and compressor myself, and made up my own wiring harness, and had to buy switches.
All up, cost me about $$1700 to $1800 dollars.
Well thats the way I went about it anyway, cost about half the price.
All up, cost me about $$1700 to $1800 dollars.
Well thats the way I went about it anyway, cost about half the price.
I don't think you can get an air locker installed for $1200, however the compressor from memory is more like around the $400 mark; $3200 drive in drive out both lockers is reasonable of not on the cheap side.Froon wrote:$1200 per locker + compressor (I THINK around $800) fully fitted from ARB.
Free air locker to the first 20 callers!
i would be sayinig soon the last i heard from head office was that they were revising how they made things and that some head dude was overseeing every part they make and making them better or something like that...
I know it did take bout 2 months for a new hilux one that we ordered
I know it did take bout 2 months for a new hilux one that we ordered
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Hi,
a friend in Germany deals with 4x4 stuff and he buys the ARB-Lockers in USA.
It is cheaper then here in Australia - dont ask me why!?!?
But in USA you have to pay ~700 US$ for a Toyota Locker (RD23,RD132).
If i see the prices here even for used ones i think i will buy in USA too.
http://www.alljeep.com/oscommerce/produ ... _id=171723
Greetings
Chris
a friend in Germany deals with 4x4 stuff and he buys the ARB-Lockers in USA.
It is cheaper then here in Australia - dont ask me why!?!?
But in USA you have to pay ~700 US$ for a Toyota Locker (RD23,RD132).
If i see the prices here even for used ones i think i will buy in USA too.
http://www.alljeep.com/oscommerce/produ ... _id=171723
Greetings
Chris
Oh you're in Penrith. Ring Chris or Ben at HiTech 4X4 Specialists and tell him what they quoted you and what it was for. If that above price is legit i'm sure he'll beat it, tell him I sent youLuXaNator wrote:Hey guys,thanks for the reply's,
I rang up arb in penrith and they will sell me everything and install it for $3500 drive in drive out.
which is pretty reasonable i rekon..
cheers

0247 217 783 or drop in, they're up the far end of Coombes Drive (Hudson Hardware end)
Last edited by -Nemesis- on Sat May 31, 2008 11:33 pm, edited 1 time in total.
Lovin the FZJ105-T, bling by Ryano
if you have your air lockers fitted by an arb store,the warranty applies through all arb stockists,australia wide.
thats pretty good piece of mind.especially if you were to move to another state.
if you have them fitted through a tjm or any other 4x4 shop and have a warranty problem,you will have to take it back to the same shop.
all airlockers are made in australia.
i know what stockists pay for their lockers and do not believe you could by them cheaper in the USA.especially by the time you include freight,because they are bloody heavy.
arb stockists will sell airlockers to tjm and other 4x4 stores at dealer price,
how much they mark them up is up to them.
thats pretty good piece of mind.especially if you were to move to another state.
if you have them fitted through a tjm or any other 4x4 shop and have a warranty problem,you will have to take it back to the same shop.
all airlockers are made in australia.
i know what stockists pay for their lockers and do not believe you could by them cheaper in the USA.especially by the time you include freight,because they are bloody heavy.
arb stockists will sell airlockers to tjm and other 4x4 stores at dealer price,
how much they mark them up is up to them.
Yes its funny - but why are so many shops in USA selling them for ~700,-$ after they paid the freight from AUS to USA?arb383 wrote:i know what stockists pay for their lockers and do not believe you could by them cheaper in the USA.especially by the time you include freight,because they are bloody heavy.
arb stockists will sell airlockers to tjm and other 4x4 stores at dealer price,
how much they mark them up is up to them.
ARB wants 1219,-$ for each Locker.
If you need two of them, its over 1000,-$ difference.
And the freight isnt 1000,-$...
http://www.rockequipment.com/gears.htm
might be that most airlockers go to the states? economics, bulk, etc etc. has someone here bought 2 airlockers from the states and shipped em over here?
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Who is online
Users browsing this forum: No registered users and 6 guests