will himount fit in 80 arb delux winch bar

[69mud]

will hi mount fit in 80 arb delux winch bar or only a arb commercial winch bar
i have a delux winch bar and a hi mount its not looking like its possible [without modification] i had a low mount fitted in it with adaptor kit.but now when i trying to o fit this hi mount but the gear casing hits on the small middle bar where you mount driving lights and also lower stone tray but it can go in scap pile with the grill assem... can anyone tell me yes or no ..or how else to get around this ..

[badger]

make some 10mm spacers to space the winch back a little then chop the top out to fit and remove the spot light tabs from the lower rail.

or sell it n buy a new bar

[69mud]

thanks but it alreadry has 2 10mm spacers and still wont fit ..think the only way around it is do with out the spacers and just fit straight to bar cut out spotlight mount bar alltogether..

[The Fish]

I have a high mount fitted to my deluxe bar. Removed the light bar and had a new one bent up and then welded it in, cut out angled braces to clear brake assy. and welded in 6mm packers. Will look for some pics and post them up.

Cheers, Shane

[The Fish]

This is the only pic I could find that shows what's been done. Could take a pic looking down on the winch if your interested

Cheers, Shane.

[/img]

[69mud]

thanks a heap mate yes thats the easyest way and now the way i will do it