Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Duel fuel and 3 inch lift
Duel fuel and 3 inch lift
hey, i put the 3" lift in my GQ a while ago and had to take out the fuel tank due to upper control arm and have been running straight gas since. now what is the best thing to do now. get a bent upper control arm or get the tank notched. with getting it notched who would i talk to / get it done?
Ive got a 4" lift and had the tank cut out.
I wouldnt have thought you could get a arm bent enough to clear the tank.
My upper arm goes a good couple of inch's into the tank on full articulation.
I dont run sway bars though.
Got my tank modified by Total 4wd center in epping. But was about 6 years ago.
I dont know if they are still around.
I would look up a alloy fab company or any of the aftermarket tank suppliers. Should be someone this side of town that can do it.
I wouldnt have thought you could get a arm bent enough to clear the tank.
My upper arm goes a good couple of inch's into the tank on full articulation.
I dont run sway bars though.
Got my tank modified by Total 4wd center in epping. But was about 6 years ago.
I dont know if they are still around.
I would look up a alloy fab company or any of the aftermarket tank suppliers. Should be someone this side of town that can do it.
Who is online
Users browsing this forum: No registered users and 118 guests