Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bilsteins 7100

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 17
Joined: Mon Mar 03, 2008 5:11 am
Location: W.A

Bilsteins 7100

Post by xr393 »

Just chasing some info on the 7100 series shock. Has anyone used them on a hilux solid axle or any thing else and if so what did they think of them. Also what valving did you use.
Cheers
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Asked this question last week.

http://carl.outerlimits4x4.com/ftopic140744.php
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Have a look at http://www.eshocks.com there is a page on bilstein shock rates and a table of recommendations for different vehicles and single or dual shocks - also good prices given the exchange rate.
John
Top
Posts: 17
Joined: Mon Mar 03, 2008 5:11 am
Location: W.A

Post by xr393 »

Cheers for the links.
Top
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

No biggy on getting them re-valved if need be.
I recommend Baker Bros in Melbourne, but Heasmans in Sydney and Quadrant in Melbourne are the Oz importers and so can also do re-valves/rebuilds.
300Tdi Defender 130 CC
Top
Posts: 17
Joined: Mon Mar 03, 2008 5:11 am
Location: W.A

Post by xr393 »

Thanks for that. Going off Bilsteins valving chart i'm going to order AK 7114SB05 for the front . It will be interesting to see how they work with parabolic RUF. I'll keep you posted if anyones interested.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Would parabolics be valved more like coil's?
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 17
Joined: Mon Mar 03, 2008 5:11 am
Location: W.A

Post by xr393 »

At a guess yes. With no shocks in the front i can get nearly 500mm of spring out of it so i'm a little bit worried about on road handling. Might have to work out a swaybar for it . I've seen one off a speed car being used here on outers but i'll get to that when i finnally get to drive it again.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests