Can any one confirm that my research is correct.
93 EFI Vit LWB 1.6 4sp auto
Auto
1st 2.826
2nd 1.493
3rd 1.000
4th(OD) 0.730
R 2.703
T'fer
H 1.000
L 1.816
Diff 5.125
Giving a crawl ratio (Low-Low) of 26.3
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Auto 1.6 Vitara gear ratios
I think that's right, except you don't have the converter multiplication ratio in there - I think it's 2.4 for the AW-4, so you're acutally at 63:1 as a manual equivalent.
CJ, can you confirm that ratio is correct?
Steve.
CJ, can you confirm that ratio is correct?
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Cheers, is the convertor torque ratio needed for using engine revs to work out road speed? How much loss occurs before the convertor is coupled/locked?
One(two) Last thing(s).
Does the Cal 5.83's bolt onto Air locker centers with out any probs?
Also the 5.83's are listed as "Temporarily Discontinued" any looked into it?
One(two) Last thing(s).
Does the Cal 5.83's bolt onto Air locker centers with out any probs?
Also the 5.83's are listed as "Temporarily Discontinued" any looked into it?
No, the converter ratio only applies up to stall speed, so once rolling the slip is negligable (around 150rpm) However, you also have a converter lock so under light throttle/cruise, your converter will be locked so there's zero slip to allow for.
5.83 calminis?
These haven't been available since time began. Cj has done lots of research into these. They don't exist and I don't think they've existed for about 4 years. There were issues between calmini and Richmond, who were making them, I think, and I don't think you'll be seeing any in the future.
Steve.
5.83 calminis?
These haven't been available since time began. Cj has done lots of research into these. They don't exist and I don't think they've existed for about 4 years. There were issues between calmini and Richmond, who were making them, I think, and I don't think you'll be seeing any in the future. Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Right, I saw the previous posts bout 5.83s and assumed that they came back into availibilty at some point then went out again. "Temporarily" my arse 
I just have to keep and eye out for a 2nd hand set going cheep
spotted this at boondoxs
http://www.boondoxmotorsports.com/zuk_drivetrain.html
I just have to keep and eye out for a 2nd hand set going cheep
spotted this at boondoxs
http://www.boondoxmotorsports.com/zuk_drivetrain.html
even when the 583s did exist they had some durability issuses as they were made quite soft to keep the dentist drill burr .. I mean pinion gear in one piece for more that 10 seconds of hard use.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 1 guest