Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

thermo fan control switch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

thermo fan control switch

Post by derangedrover »

Is anyone using a thermo fan control switch that doesnt need to be in the lower hose, ie one of the thermistor type that goes between the radiator tubes?
Im looking for a thermo control switch that is water proof, preferably solid state, and doesnt require that I open the cooling system to install it.
Any ideas?
Cheers
Daryl
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

when u find one tell me what it is i need to replace my davies craig POS that is a thermal strip type
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Post by big red »

you can get one from a refrigeration wholesaler.
They are electronic, can have waterproof probes, you can mount the control unit inside the cab, you can get 12v ones, the control displays the temperature, the temp can be adjusted over a wide range of temps [-99 to 200 C ] , the differential [temperature difference between cut in and cut out] can be adjusted from 0 to 100.
you would probably have to have the controller operate a relay [like a spotlight one] as i think they are only rated at 4 or 5 amps.
price from $70.00 upwards.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

Post by Mungrel Breed »

i looked around the wreckers to get mine. i think it depends on your motor, what holes and how big they are. i had to remove a thermo-vacuum switch in the water pump jacket to put in mine. You just need to know your hole and thread size,it cost me $10.
Always out numbered never out gunned!!!
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Mine has a sensor that goes thru the radiator fins,It was cheaper than the davies craig ones ,I picked it up at American auto parts, homebush.
Had it for about two years never had a problem.
For my apllication the sensor could have been half the length ,Zook rad tiny, It controls a rover discovery thermo. :)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest