Just curious, that zinc-rich paint for "cold galvanizing"... designed I think for steel.
If that were used on aluminium, would it tend to make the total package more resistant to corrosion or actually more prone to corrosion?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Zinc-rich paint
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Zinc-rich paint
This is not legal advice.
No, only the zinc, until it is all gone, then then the alloy corrodes. If you are only using paint instead of a large ingot of zinc, don't expect too much protection.
I know that that alloy outboard motors have anodes;
From the interweb;
Commonly-known metals are ranked in terms of 'nobility', with gold being at the top and zinc near the bottom. This nobility ranking refers to the metal's ability to resist galvanic corrosion.
The less noble the metal, the more easily it will corrode. If more than one type of metal is involved in the corrosion process, the least noble metal will corrode first. So, introducing an ignoble metal into the process stops the electron transfer between the differing component metals that need to be protected. For example, if stainless-steel and bronze components are immersed in seawater, the less-noble bronze will surrender its electrons to the seawater, corroding away in the process.
Does the bus have an alloy brake pedal?
I know that that alloy outboard motors have anodes;
From the interweb;
Commonly-known metals are ranked in terms of 'nobility', with gold being at the top and zinc near the bottom. This nobility ranking refers to the metal's ability to resist galvanic corrosion.
The less noble the metal, the more easily it will corrode. If more than one type of metal is involved in the corrosion process, the least noble metal will corrode first. So, introducing an ignoble metal into the process stops the electron transfer between the differing component metals that need to be protected. For example, if stainless-steel and bronze components are immersed in seawater, the less-noble bronze will surrender its electrons to the seawater, corroding away in the process.
Does the bus have an alloy brake pedal?
I'm the sharpest tool in the shed!
Re: Zinc-rich paint
Why use anything? Aluminium IS resistant to corrosion. Its only when exposed to certain chemicals or elements that generate electrolysis that will corrode it.chimpboy wrote:Just curious, that zinc-rich paint for "cold galvanizing"... designed I think for steel.
If that were used on aluminium, would it tend to make the total package more resistant to corrosion or actually more prone to corrosion?
Whats it being used for?
Cold galv paint is ok for temporary protection of bare metal but it still needs to be top coated for longer term protection.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Who is online
Users browsing this forum: No registered users and 1 guest