Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i have done my suspension its a 2 inch with custom shock mounts and rancho 5034s in the rear and the only thing in the way of maximum flex is the tires hitting the spring perch on the up travel so im going to have to get wheel spacers and would like some feedback on what size spacer other people have used .i have 1 inch off set rims running 35/12/15 mtrs on a Salisbury
only need them for off road .cops dont hassle me yet so i would like to keep it that way and i would rather the hassle of putting on spacers when i go wheeling rather than fitting bigger flares
sounds like you would be better off with a new set of rims for off road and some road tyres, much safer and only half the work when you want to offroad.
i've got a disco1 with snake racing 38mm spacers with my steel 18mm extra offset disco rims for offroad. i use standard alloys on the same spacers for road use. good when you dont want to buy more rims.
jbell wrote:Rovacraft in w.a. & n.s.w. do an 11/4 spacer for rovers
not cheap but well made. Got them on my 130 with disco
alloys, gives it a good stance.
advdisco1 wrote:i've got a disco1 with snake racing 38mm spacers with my steel 18mm extra offset disco rims for offroad. i use standard alloys on the same spacers for road use. good when you dont want to buy more rims.
would you have a pic of it with the offset rims and spacers on am thinking of spacers myself for my D1
am thinking of spacers myself for my D1 
