Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Places to fit transfer case gears in Melb

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Places to fit transfer case gears in Melb

Post by Dexter »

Has anyone had transfer case gears fitted in Melbourne? Where did you have it done?
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

No one?
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I bought an exchange transfer case from Bitsamissin, with aftermarket gears installed. That was all done in Melbourne, but I don't know who did it.
Top
Posts: 408
Joined: Thu Sep 25, 2003 1:21 pm
Location: "Shit"ney

Post by Noisey »

By memory it was one of his mates who fitted yours Scott - I borrowed your old case and fitted them at home with some help from my "old man" then gave Frank my old case.

It's kinda like a little lurve triangle we had going :D

If you can get your hands on another case it makes a world of difference - it is a job you can do yourself ....you just need to be patient and think it through (and takes lots of pics as you go to remind yourself of how thing are setup)
When I read about the evils of drinking, I gave up reading
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

Noisey wrote:By memory it was one of his mates who fitted yours Scott - I borrowed your old case and fitted them at home with some help from my "old man" then gave Frank my old case.

It's kinda like a little lurve triangle we had going :D

If you can get your hands on another case it makes a world of difference - it is a job you can do yourself ....you just need to be patient and think it through (and takes lots of pics as you go to remind yourself of how thing are setup)
Hehe pretty sure it is a task well out of my capabilities.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest