Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear bundera shocks

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5
Joined: Fri May 02, 2008 11:15 pm
Location: newcastle

rear bundera shocks

Post by luke_j »

I am putting a lift kit in my 86 coiled 2.4 petrol bundera and have noticed that the shocks on mine are diffrent on each side ie left shockie is bolt a top hole at bottom right shock hole top and bottom is this usual

The kit I have been supplied has the same fittings on both sides so the right shock in kit does not fit. Has my car been modified or is this normal ?
Top
Posts: 144
Joined: Wed Sep 06, 2006 8:44 am
Location: Warwick

Contact:
Contact loopy31

Post by loopy31 »

Same on mine...normal...get the welder out and change to correct connection.
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

its normal, yey to eye on one side and eye to pin on the other.

if its just a 2" lift then take it back to the supplier and tell them to give you the right hardware, if its something custom then as mentioned you will have to fab something to make it fit.
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 5
Joined: Fri May 02, 2008 11:15 pm
Location: newcastle

Post by luke_j »

thanks for the advice ill try and get a diffrent shockie if not ill make a bracket
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests