Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

h150 to 100x

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 97
Joined: Mon Jun 06, 2005 6:33 pm

h150 to 100x

Post by tobie »

anybody put a h150 from a standard 80x into a hzj100x
do they go straight in or does the gearbox mount have to be changed
i am gyessing that the tailshafts shall be modded
just asking bout the crossmember
Top
Posts: 310
Joined: Thu Apr 20, 2006 10:38 am
Location: Melb. AU

Post by hdj105 »

Overall length is the same, so tailshaft should be OK.

You will need to change the t/case or at least the input gear as the splines are different.

Also need to check the position where the lever exits the box as it appears there's some differences there.
Greg G
2000 HDJ105
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

The shifter is different, if you can get a petrol 100 one, that is all you need for the box...then its input shaft on the transfer or an 80 transfer box...
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 97
Joined: Mon Jun 06, 2005 6:33 pm

box

Post by tobie »

thanks andrew /greg
i should have been a little more specific
the h150 if box and t/case from a part time 80x
so from the above it will bolt straight in with only the shifter to change
looking to buy a 100x and put the box into it to have a stronger box
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests