Hi,
Has anyone ran 32x11.5x15 tyres on a 7 inch rim??
I know recommended is 8inch minimum, and a skinnier rim can cause sidewall shift on cornering.
This is for a zook, just wondering if anyone has done this, and what issues it may cause with handling etc.
I thought it may be more of a issue on heavier 4bys, but thinking it may be unnoticeable on a zook.
Most 33x12.5 should be on a 8.5 minimum, but most people run them on 8" rims.
Thanks
Jay
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
11.5" tyres on 7" rim???
Yea i know its a bit wide, but i have a mate that works for goodyear, so wrangler mtr's for $100 a tyre is hard to refuse.
They only make a 33x12.5 and 32x11.5, i didnt want 31's
Putting them on a smaller rim should pull them in to around 10.5 wide, on an 8inch rim they measure approx 11inches wide.
thanks for the reply
They only make a 33x12.5 and 32x11.5, i didnt want 31's
Putting them on a smaller rim should pull them in to around 10.5 wide, on an 8inch rim they measure approx 11inches wide.
thanks for the reply
Who is online
Users browsing this forum: No registered users and 4 guests