Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rock lights

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

rock lights

Post by crack »

gday

wanting to run 4 lights of the one switch. they are just rock lights so probably no more then 55w for each light. how do i go about this?

if anyone has a diagram that would be great

cheers
jack
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Posts: 214
Joined: Fri Jul 16, 2004 10:23 pm
Location: Brisbane, Aus.

Post by barbz »

Just use the same wiring as you would for spot lights, but the trigger wire for the relays (1 per set of lights) would be the same wire and come straight from a 12v powersupply with a switch instead of the highbeam wire.

Paul
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

easy mate, get some 4mm cable to a relay on one side, then back out to all your lights, wire all lights up off this cable and fuse it to the battery, then run a light gauge wire to a switch in your cab from your battery then from the switch run to the switch side of the relay, run the other switch side to ground then when you turn the switch on, the relay connects all your rock lights to power, and you wont need massive heavy gauge wire running in your cab :)

ill get the proper relay pinouts for you when i get a chance
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

Hi Jack,

i done quick a wiring diagram.

Image

Greetings
Chris
Top
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

cheers mate
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

See this months issue of 4WD Action. I'd think the lenses would be smashed up too often.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Contact:
Contact bushy555

Post by bushy555 »

joel HJ60 wrote:See this months issue of 4WD Action. I'd think the lenses would be smashed up too often.
Yeah, if half serious, really needs a bit of clear lexan or 10mm clear perspex mounted in front of the lights. Years ago when money was cheaper, I went silly and put 16 of those super cheap $25.00/pair lights over three vehicles. Five are smashed...
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Top
JAD
Posts: 1
Joined: Wed Jun 11, 2008 2:30 pm
Location: Southcoast, S.A

Post by JAD »

I would use 5mm instead of 4mm. 5mm rated at 25A 4mm is 15A
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests