Hi,
just wondering if anyone can help me with injector crack pressures.
My question is..... How much boost can you run before you have to change the crack pressure of the injector? And what is it normally changed to?
Any help would be great
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
injector crack pressure TD42T
Both n/a and fact td42t opening pressures are 110 bar +- 5. Setting them higher gives no power increase, it just allows for better atomisation and penetration into the compressed air.
Best to leave them at the higher spec, unless its a performance unit.
Andy
Best to leave them at the higher spec, unless its a performance unit.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Who is online
Users browsing this forum: No registered users and 3 guests