Cheers Kev
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Defender Lift
Moderator: Micka
Defender Lift
Just wondering everyones thoughts on lifting a Defender 3 to 4 inches has anyone done this to theres? I am looking at raising the front shocker tower and running raised coils and 80 series shocks in the front and modifying the rear shock mounts to run GQ shocks on the rear.What do you guys think? Or does anyone no if there is a off the shelf kit.
Cheers Kev
Cheers Kev
Can be done but you will have to address problems caused by changes to driveline angles - castor angle, driveshafts, a-frame, trailing arms...
On the other hand, a 2" lift will fit 35's if you trim the flares and you might get away with minimal changes to the driveline... don't go for more lift than you need IMHO - just makes the truck tippy.
On the other hand, a 2" lift will fit 35's if you trim the flares and you might get away with minimal changes to the driveline... don't go for more lift than you need IMHO - just makes the truck tippy.
ct
lowbox is right, keep the lift to a minimum, much more stable.
defenders have heeps more room for uptravel than their rangerover cousins. some guys run 34" jt2's on stock suspension in defenders and they only just rub. (with the right offset rims- disco wheels offset 25mm. more than stock.)
the front toy conversion works a treat on defenders(1" spacer)
rear gq needs a pin to eye convertor at the bottom(very easy to make)
you will probably need to lift the rear top mount. i have seen a 10mm steel plate used here.
rovers are cursed with shocking rear bush angles for greater than stock articulation. i was told lra (rangie spares) make and sell a nice rear shock mount kicker thats excellent for restoring bush geometry.
4"lift is very high. unless you widened?? the track by double that(8") a stock height defender with the same size tyres would outdrive you every time off-camber and sideslopes.
(easy to find at the mall though
)
defenders have heeps more room for uptravel than their rangerover cousins. some guys run 34" jt2's on stock suspension in defenders and they only just rub. (with the right offset rims- disco wheels offset 25mm. more than stock.)
the front toy conversion works a treat on defenders(1" spacer)
rear gq needs a pin to eye convertor at the bottom(very easy to make)
you will probably need to lift the rear top mount. i have seen a 10mm steel plate used here.
rovers are cursed with shocking rear bush angles for greater than stock articulation. i was told lra (rangie spares) make and sell a nice rear shock mount kicker thats excellent for restoring bush geometry.
4"lift is very high. unless you widened?? the track by double that(8") a stock height defender with the same size tyres would outdrive you every time off-camber and sideslopes.
(easy to find at the mall though
)
Who is online
Users browsing this forum: No registered users and 0 guests