Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

shock length and angle

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

shock length and angle

Post by AcTioN13 »

g'day all, just a quick question and yes i did have a bit of a search before asking.

when doing IFS rear to live axle, what length shocks are people using with this setup?

and yes i will be doign the / \ to the shocks, what rough angle is used?
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

and yes sorry to specify its on a hilux :lol:
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

anyone?
Posts: 28
Joined: Sat May 03, 2008 7:15 am
Location: nsw

Post by fudly »

when doing IFS rear to live axle, what length shocks are people using with this setup
whatcha mean by independent front suspension rear??
and for the length wouldnt it be just outside your maximums
as in slightly more then your full downward flex and slightly less then your full up?? not to sure but i would just measure it
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

desent really matter m8.. ya can lay them over or stand em upright watever hey.. just that you will have more bodyroll if you lay em way over purely for the fact that the shocks dont move as much, stand em up they will work alot better you just wont be able to run long shocks unless ya make up a higher shock mount or something like that.
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests