Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4b shuddering

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

4b shuddering

Post by Nev62 »

Have a problem where a 4b will start shuddering super bad on and off from around 60kmh when driving. It is not consistent but scares the crap out of you big effort to maintain control. It is not just the wheel but the whole car that shakes violently (like a dogey shopping trolley wheel only much worse).

I have checked the wheel bearings but they seem fine. Any ideas what else to check?
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

your FJ, or another fourby?

Solid, or IFS?
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

-Mud inside the rims
-Bent Rim
-Warped Tyre
-Driveshaft out of sync

I've had all those =P
The worst thing about censorship is ███████.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Mine did the same with a bent tie rod... Toeing in 16mm is deadly.
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

panhard bussshes??? my nissan did it which car is it?
1995 land rover disco on 265 muddies
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

chikoroll_ wrote:your FJ, or another fourby?

Solid, or IFS?
not mine, old zook
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

Have changed the wheels/tyres - no change
Have checked/reset wheel bearings - no change
tie rod ends good
no noticable movement in kingpins
steering dampener good
alignment looks ok

The shudder started after a body lift, have rechecked the lift and nothing out of place.

What am I missing???????????
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

Post by icrawl »

go and get the wheels balanced mine did the same was one weight had fallen of while 4wheelin
Top
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

steering wheel extension post?
transmission/transfer stick?

might be rubbing on the body, causing everything to shake
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

may need a return to center steering dampner, a mate of mine had the same problem fitted one of these and fixed it....not sure about your prob though
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

Nev62 wrote:
What am I missing???????????
spring/shackle bushes and bolts are tight?
Top
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

Post by icrawl »

get wheels balanced matbe weight has come off my 80 did the same was weight had come off and would shake like shit at 80km all fixed when wheels re balanced
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Check u-bolts .

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

OL GQ UTE wrote:may need a return to center steering dampner, a mate of mine had the same problem fitted one of these and fixed it....not sure about your prob though
just mask's the problem, doesnt fix it.
Top
Posts: 138
Joined: Tue Nov 06, 2007 6:39 pm
Location: Noosa

Post by Dominator »

my patrol does the same at about 80-85. Got a alignment and the castor checked and the guy told me one of my front panhard bushes are buggered. Get them checked.
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

Dominator wrote:my patrol does the same at about 80-85. Got a alignment and the castor checked and the guy told me one of my front panhard bushes are buggered. Get them checked.
no panhards in a leaf sprung sierra
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests