Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oil return line for 2H turbo

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

oil return line for 2H turbo

Post by Nat84 »

hi guys i'am going to turbo my 2H LC but would like to know if i can put the turbo retuen line in with the alt's return line or it must go to the sump..

Nat
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

mine gone to the sump when it wasnt shatterd
1995 land rover disco on 265 muddies
Top
Posts: 24
Joined: Tue Sep 26, 2006 7:32 pm
Location: diamond creek

Post by diso »

Mine went to the side cover where the pushrods are.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Alt return line (and especially the fitting on the engine end) will probably not flow well enough - oil could back up and push through turbo seals.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

dogbreath_48 wrote:Alt return line (and especially the fitting on the engine end) will probably not flow well enough - oil could back up and push through turbo seals.
Agreed.. Punch a hole high in the sump and bronze a fitting in there. Easy done.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 291
Joined: Wed Jun 16, 2004 10:44 am
Location: Adelaide

Post by sambo »

Put it in the side of the sump, but make sure it is above the level of the oil.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Is there any benefit to putting it in the sump instead of the lifter covers?
I figure on extreme angles oil could reach the level of the return in the sump, causing it to back up - is this possible?
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

can i put it in the cover in the side of the motor??
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 24
Joined: Tue Sep 26, 2006 7:32 pm
Location: diamond creek

Post by diso »

mine was there and i had no worries.
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Nat84 wrote:can i put it in the cover in the side of the motor??
Thats where the installer put it on my Denco turbo.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

yes go for the side cover, it drains directly to the sump and is a lot less effort.
Free air locker to the first 20 callers!
Top
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

2h return line

Post by brendan rooke »

dumbdunce wrote:yes go for the side cover, it drains directly to the sump and is a lot less effort.
How come you dont see any in the side cover. Its sounds like a good idea and heaps easier to install. I had an air research turbo high mount on my old 2h and the return went to the sump. Im just about to do a turbo job on my new 60 and (same air research turbo and high mount manifold). Im just wondering has anyone done the return line to the side cover before?
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Here is the way mine was done;

Image
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

2h return line

Post by brendan rooke »

Thats all i need to know :) . Thanks for that mate.
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Re: 2h return line

Post by Nat84 »

brendan rooke wrote:Thats all i need to know :) . Thanks for that mate.
yep same here thanks
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Nice leak Mark :)
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

joel HJ60 wrote:Nice leak Mark :)
I don't fix any of my oil leaks - they inhibit rust.........
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

2h return line

Post by brendan rooke »

And we all know how 60's like to rust.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

dogbreath_48 wrote:Alt return line (and especially the fitting on the engine end) will probably not flow well enough - oil could back up and push through turbo seals.
can back up and create hot spots in the block, causes a smokey turbo
hands and mums dont count!!!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

sambo wrote:Put it in the side of the sump, but make sure it is above the level of the oil.
you can even "T" it into the sump drain plug, had that on a hilux for years with no worries, not ideal, but no cut and weld necessary, so above the oil line is not critical
hands and mums dont count!!!
Top
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

2h return line

Post by brendan rooke »

So you wouldnt recomend putting the return fitting in the side cover?????
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests