Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ARB RD136 works on front GQ H233B ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

ARB RD136 works on front GQ H233B ?

Post by Mario »

I plan to get a front ARB locker. If I buy the new RD136 (replacement for RD78A) will I be able to use it on my actual GQ front ?
What if I get a RD78A ? Will I be able to use it on a GU front ? I read somewhere that I have to remove a pin, but not sure ...
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

According to ARB website's application list, it's still an RD78A.

http://www.arbusa.com/alac/215109.pdf
KRiS
Top
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

http://www.arbusa.com/alac/alsp/0-00.pdf

look at page 3
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Fair enough, therefor my answer is ... no idea. :D
KRiS
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

yes the new RD136 fits both GQ and GU you get the thrust pad with it to fit in GQ as you did with the RD78A but you dont need it anyway just fit the GQ axles in without pad. i have fitted 4 of the new RD136 allready and have had no problems .I never used the pad in the RD78As either in fact in some trucks the thrust pad makes the axles bind up as there to tight
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 51
Joined: Wed Jan 08, 2003 2:16 pm
Location: Melbourne

Contact:
Contact dbongard

Thrust Block

Post by dbongard »

The thrust block is not required for front fit.
It is there for semi-float rears where the vehicle came with an OE thrust block.
You can tell it has one if you look inside the OE diff and see axle scrub marks .
Otherwise they are good for propping up that one table leg that's too short. :D

-daniel
AIR LOCKER
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests