Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oil leak...

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1
Joined: Sun Aug 26, 2007 7:40 pm
Location: sydney

oil leak...

Post by toughdog »

hey... i have a 93 model zook... i haved looked everywhere and still cant find a answer...
i just had the engine rebuilt,,,on the way home from sydney i noticed that my air box had about 50ml of oil in it,,,
im pretty sure that its coming from the camshaft breather.. but dont no why...
if any one has any idear please let us know..
cheers
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Oil in the filter coming from the rocker cover in a new motor suggests the rings have not bedded in properly..
Could be a few reasons but most likely is incorrect honing procedure.
Not happy Jan!
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

Could be the PRV is stuffed into the intake manifold...

check the line and valve at the tee off into the manifold from the rocker breather to the air box..

of course... rings is the other culprit...

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Posts: 124
Joined: Sun Dec 09, 2007 12:53 pm
Location: eastern suburbs, victoria

Post by lilzook »

If you JUST had it rebuilt and this is one of your first drives, then some oil blow by would be normal. but if you have 1000+kms on the motor and it has done this, then i'd say the rings havnt bedded in properly.
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

Pinball wrote:Could be the PRV is stuffed into the intake manifold...

check the line and valve at the tee off into the manifold from the rocker breather to the air box..

of course... rings is the other culprit...

Spock
bingo.......
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 46 guests