Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
chop it into a ute or sell it? whats it worth?
Funny you say that lol have you checked the thread I started recently on extending wheelbase? I moved the front forward about an inch yesterday. Will move the rear diff back when I get time.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
why do a ute chop just buy a ute like i did and look at the wheel clearance ive got (though they are only 31's) and im thinking about putting carry springs in the back and moving the diff back as much as l can
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
From memory mine was around 3-4" extension in the rear and RUF + 1" in the front.
You'll get more benefit by stretching the wheelbase in the FRONT than the rear.
You'll get more benefit by stretching the wheelbase in the FRONT than the rear.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Yeah I guess the front way forward would really help weight distribution if you got the axle in front of the motor. But that said without some serious work to the front end (chassis ext, longer springs, cut gaurds, cut/custom front bar, Steering mods) it'd be hard to get much more than an inch wouldn't it? With the inch forward my wheel sits pretty centre in the gaurd now, much more forward and I'd have to cut a bit out of my bullbar.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
rustyzook wrote:yeah we will see what happens, the way it drives i might go SPUA again that nasty z-link is EWWWW!!! i know why there illegal now! and yes grimbo when you comment i know its illegal!
Z-link is evil, get yourself a high steer knuckle, or at least merc arms. Did you adjust your caster. If you did not set correct caster you will have a terrible handling car. SPOA is good, but only if done right.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Put some WT diffs in SPUA form and you'l fix all your problems, hight, flex, and most importantly narcolepsyrustyzook wrote:its set right, i checked the u-bolts today ant they had come a little loose, so tightned them up and its all good now, i want hi-steer but there 1ltr diffs
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
Who is online
Users browsing this forum: No registered users and 10 guests