Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Group buy on C44F sliders
Moderators: toaddog, Elmo, DUDELUX
Ok guys I finally got off my arse and sorted this out. Brooksy would like a deposit up front to cover materials also.
At this stage we have the following as definates or interested can you confirm or deny and fill in the blanks please.
Definates
krusty1- Lux d/c 03 2" Bodylift infills??
Ferrit-Hilux d/c 92 No bodylift No infills
Pilot-Hilux si/c ?? ?? ??
Maybes?
Sierrajim
benolux
luxyboy
huxlux
mischief
hixi26
fatng
Rod I have sent you a PM regarding the later model ones.
At this stage we have the following as definates or interested can you confirm or deny and fill in the blanks please.
Definates
krusty1- Lux d/c 03 2" Bodylift infills??
Ferrit-Hilux d/c 92 No bodylift No infills
Pilot-Hilux si/c ?? ?? ??
Maybes?
Sierrajim
benolux
luxyboy
huxlux
mischief
hixi26
fatng
Rod I have sent you a PM regarding the later model ones.
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Tourer and daily: 120 Prado with some mods
I have sent Brooksy an email the other day in regards to sliders and rear bar .
Count me in definately .
I have a 05 DUAL-CAB , no body-lift .
Chasing a black set of sliders , no infill required .
PM me and let me know the details as to what Brooksy wants in regards to depoist .
I am from the newhilux.net forum .
Cheers Jim
Count me in definately .
I have a 05 DUAL-CAB , no body-lift .
Chasing a black set of sliders , no infill required .
PM me and let me know the details as to what Brooksy wants in regards to depoist .
I am from the newhilux.net forum .
Cheers Jim
i'm definate
2006 (current shape) standard x-tra cab, no body lift or anything.
I'll have it unpainted & no infills if that makes it any easier (if not i'll just go with the flow, thanks)
pm with total cost & amount needed for deposit & bank details.
2006 (current shape) standard x-tra cab, no body lift or anything.
I'll have it unpainted & no infills if that makes it any easier (if not i'll just go with the flow, thanks)
pm with total cost & amount needed for deposit & bank details.
Last edited by mischief on Mon Jun 16, 2008 9:26 pm, edited 1 time in total.
Ghastly, grim, and ancient raven, wandering from the nightly shore. Tell me what the lordly name is on the Night's Plutonian shore.
Quoth the raven, "Nevermore."
Quoth the raven, "Nevermore."
Count me in on a set of sliders for a 150 series SR5 d/cab lux.
Last edited by xrdave on Thu Jun 19, 2008 7:06 pm, edited 1 time in total.
It may be that your sole purpose in life is simply to serve as a warning to others.
Mine also has a LR tank, but i cant see that affecting the mounts too much
And mines going to to have the body off it within a fortnight or so, so that makes it easy to fit them up!
And mines going to to have the body off it within a fortnight or so, so that makes it easy to fit them up!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Hey Boof how long roughly will it take Brooksy to get the Lux's knocked over? Could we start a thread for the cruisers? Ill be ready in the next few weeks, for a set of sliders for the 80.
Will contact Brooksy in a few weeks time, i have a few ideas in order to make mine unique
Troy
Will contact Brooksy in a few weeks time, i have a few ideas in order to make mine unique
Troy
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
neons....pfffft so 2005, lolSic Lux wrote:You don't have to have neon's on them troy to look cool.
sorry for hi-jacking!
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Ok I have spoken to Brooksy about the infills prices are as below. If anyone needs freight we will be getting weights and measuremenst from mine on the weekend so that will help to work it out.
Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)
Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Tourer and daily: 120 Prado with some mods
Definite.
Dual Cab 06 Hilux -
Would like recessed alum. plate (3mm) bolt in with dimple holes.
Also registered on www.newhiux.net
Cheers
Zac.
Dual Cab 06 Hilux -
Would like recessed alum. plate (3mm) bolt in with dimple holes.
Also registered on www.newhiux.net
Cheers
Zac.
I will be talking to brooksy about deposits and timeframes this weekend as we seem to have enough between the couple of forums.
Updated list
Definates
krusty1 - Hilux - d/c - 03 - 2" - infills??.........................$450.00
Ferrit - Hilux - d/c - 92 - none - none............................$450.00
Pilot - Hilux - s/c - 04 - none - none.............................$450.00
Louie - Hilux - d/c - 05 - none - none...........................$450.00
Mischief - Hilux - x/c - 06 - none - 2 tone......................$520.00
Xrdave - Hilux - d/c - 05 - none - none........................$450.00
Hixi126 - Hilux - x/c - 01 - 2" - 2 tone..........................$520.00
Cool 95 - Hilux - d/c - 08 - none - checkerplate............$600.00
Fatng - Hilux - d/c - 89 - none - none..........................$450.00
Zaclux - Hilux - d/c - 06 - none - aluminium.................$720.00
Maybes?
Sierrajim
luxyboy
huxlux
Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)
Updated list
Definates
krusty1 - Hilux - d/c - 03 - 2" - infills??.........................$450.00
Ferrit - Hilux - d/c - 92 - none - none............................$450.00
Pilot - Hilux - s/c - 04 - none - none.............................$450.00
Louie - Hilux - d/c - 05 - none - none...........................$450.00
Mischief - Hilux - x/c - 06 - none - 2 tone......................$520.00
Xrdave - Hilux - d/c - 05 - none - none........................$450.00
Hixi126 - Hilux - x/c - 01 - 2" - 2 tone..........................$520.00
Cool 95 - Hilux - d/c - 08 - none - checkerplate............$600.00
Fatng - Hilux - d/c - 89 - none - none..........................$450.00
Zaclux - Hilux - d/c - 06 - none - aluminium.................$720.00
Maybes?
Sierrajim
luxyboy
huxlux
Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Tourer and daily: 120 Prado with some mods
Updated list
Definates
krusty1 - Hilux - d/c - 03 - 2" - infills??.........................$450.00
Ferrit - Hilux - d/c - 92 - none - none............................$450.00
Pilot - Hilux - s/c - 04 - none - none.............................$450.00
Louie - Hilux - d/c - 05 - none - none...........................$450.00
Mischief - Hilux - x/c - 06 - none - 2 tone......................$520.00
Xrdave - Hilux - d/c - 05 - none - none........................$450.00
Hixi126 - Hilux - x/c - 01 - 2" - 2 tone..........................$520.00
Cool 95 - Hilux - d/c - 08 - none - checkerplate............$600.00
Fatng - Hilux - d/c - 89 - none - none..........................$450.00
Zaclux - Hilux - d/c - 06 - none - aluminium.................$720.00
Sierrajim - hilux d/c - 96 - no body lift - no in fills .........$450.00
Maybes?
luxyboy
huxlux
Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)
Definates
krusty1 - Hilux - d/c - 03 - 2" - infills??.........................$450.00
Ferrit - Hilux - d/c - 92 - none - none............................$450.00
Pilot - Hilux - s/c - 04 - none - none.............................$450.00
Louie - Hilux - d/c - 05 - none - none...........................$450.00
Mischief - Hilux - x/c - 06 - none - 2 tone......................$520.00
Xrdave - Hilux - d/c - 05 - none - none........................$450.00
Hixi126 - Hilux - x/c - 01 - 2" - 2 tone..........................$520.00
Cool 95 - Hilux - d/c - 08 - none - checkerplate............$600.00
Fatng - Hilux - d/c - 89 - none - none..........................$450.00
Zaclux - Hilux - d/c - 06 - none - aluminium.................$720.00
Sierrajim - hilux d/c - 96 - no body lift - no in fills .........$450.00
Maybes?
luxyboy
huxlux
Prices: standard - $450
recessed steel bolt in plates (3mm) to allow for 2 tone painting - $520
recessed alum. checkerplate bolt in - $600
recessed steel bolt in plates with dimple holes - $640 (fully welded - $660)
recessed alum. plate (3mm) bolt in with dimple holes - $720 (for that added "BLING" factor)
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Ok I have the weights etc anyone who wants freight costs if you could PM me you post code by the end of the week that would be good. Once I have sent those out I will start asking for deposits.
A 50% deposit is being asked for, once all the deposits are paid the sliders will be made and sent out. Should anyone drag on the deposit we will draw a line in the sand and anyone not paid misses out. I cant be any fairer than that as I know my mate is keen for his set at the moment as I am sure are others.
A 50% deposit is being asked for, once all the deposits are paid the sliders will be made and sent out. Should anyone drag on the deposit we will draw a line in the sand and anyone not paid misses out. I cant be any fairer than that as I know my mate is keen for his set at the moment as I am sure are others.
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Tourer and daily: 120 Prado with some mods
Who is online
Users browsing this forum: No registered users and 0 guests