Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear over hang

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

rear over hang

Post by zook4fun »

what is the rear over hang of a stock man ute.

i'm waiting to hear back about a stockman thats not been used. i was thinking about putting the hardtop body i have on it and using the back as alittle tray or some thing like that. this car is a few hundred k's away so i can't just go have a look and haven't see any around here to go look at, run a tape over.

i'd end up with a longer wheel base and something a bit out of the norm.
cheer up emo kid
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

SWB body on a LWB chassis :roll: I don't think so.
Not without a hell of a lot of work.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

extra/style side cab maybe ok.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I was thinking about this the other day, would be uber cool and different. Hard to get into the back though with a tray in front.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

i'd work out some way to get in the back. the wheels would end up about where the blue sierra on page 9 of the fav zook thread.

could even do a bit of a strech so no rear chassis hanging out ;)
cheer up emo kid
Top
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

S

Post by Pyrotech »

Another opition id u wanted to keep the hard top and still have a tray,
would be to cut the rear door in half (left to right), along the factory 'crease' line, then weld the bottom half in place and hinge the top section from the roof, so that it wouls have a lift up style rear window,

this is what i was looking at when i had my HT

justa thought
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

thats what i was thinking in the start, some where i could put and esky, swag, wet snatch straps or other crap with out it inside the cab
cheer up emo kid
Top
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

Does this help?

LWB Sierra NT (1.3L) Chassis.
Image
Wheeling on completely wicked angles, without even looking stable.
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

that is gold!

thanks

just went and had a look at the swb chassis. i'll end up with about the last 350 mm of the chassis out the back. the fuel tank will have to be moved as it will end up half under the body in the stock lwb spot. would put it in front of the diff if i can the axles will end up about where the fuel filler is.

better go talk to my mate and get him to pull his finger out! :)
cheer up emo kid
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests